Master socket and a single socket which is an extension socket ? If so the extn wiring/socket is the issue, by removing the lower face plate this disconects the extn from the line

Give it a couple of days, to make sure you have a good stable connection.Have a look on the connections strips on the removed face plate for grot.Also check the splitter if its a damp issue could be gunked up on copper strips.

If you spot an O/R engineer locally ask him for the new 5c nte, with built in splitter, much improved and neater( or if your local to Leeds I have plenty)👍🏼

Have the spotwash duo, great bit of kit,used for dog puddles and spills,also used for keeping on top of high traffic areas, brush head comes apart easily for cleaning, as said suction is good enough to dry to walk on.handy for stairs too

Yup going with 3 mates for a mooch,looking forward to it, never been before, none of us need anything ,but expecting plenty of my Volvo estate boot space to be filled with ooohhh thats a bargin bits and bobs😉

Worked( doing comms) in a very nice/well respected one for a few days ,Newfield lodge in Castleford.newish building, staff were great,best one Ive come across on my travels

Rescue Collie/Whippet will be a bag of nerves, we make her a little tent style safe hidey hole,we just make sure shes done her plops and pees in daylight hours( not easy she’s agoraphobic too hates planes) the miniture Dachshound wont even flinch, hard as nails

Do they work ok on presta valves?

Still stuffed from the fish’n’dirks I had at dinner time, Guinness o’clock though

King Kev

Good job the shareholders got a nice fat payout just in the nick of time

Had one for few years, works great, depending what clothing your drying leave on for few hours then switch off, never had an issue with damp, condensation.no tent either.

Had some Ugg slippers for over ten years, very toastie , dont smell much,look a bit tired now, cant beat sheepskin , not sweaty just warm.

Stealth add, me, never. Fork is 26 but takes 27.5👍🏼😉

About the same i’d say, boot version with cuff is fun for a few times getting foot in,

I work for O/R , the 2years blah about copper not been supported is rot, I live in a fibre area ( supposed to be no new copper provides from 07/22 ) guess what!! Lots of people dont want or are not interested in fibre.

Lots of companys/institutions use powerfail copper back up telemetry lines, most lifts have a power fail copper line for example

Will keep me busy weaving copper wires until I retire.
ps the  O/R network has been opened up for other companys to use, they are very carefull and dont damage the excisting network at all 🤣

No need for the old copper Wire & socket to be removed, if its still in good nick.takes away choice. Should only be removed if asked to be removed by homeowner.Sometimes the old copper d/w is used to draw the new Fibre line pole to property, ok if agreed to be removed,sometimes done by lazy engineers,and a lot of sub contractors without permission.

Someone I know(Moi) has a med genisis IO frame with a very nice dt swiss fork taking up space😉😉🤦🏼‍♂️

He/She is As thick as the floor

youv’e got more chance,of been bitten by a daffodil

Also a big fan of Howies bibs, had 2 pairs , one 3/4 which have died after 5 years, and a pair of normal length which are just about hanging in there.Have replaced with overland/morvello bibs,not as comfy but very very close( for me anyway)👍🏼

Kin ell that looks a treat 👍🏼

Just run up to same issue. Shouldv’e double checked 🤷🏼‍♂️🤦🏼‍♂️

Witch burn him(not MG)

Going to give a good few rides, with the drab xt chain, then try the kmc again, might be the new unites teef need to bed in, although I wouldv’e thought the finiky Xt chain would be the problem chain.

thanks for all replys👍🏼

Its the kmc chain, works fine with 12sp xt chain🤷🏼‍♂️

Its a unite oval btw, never had any issues before,with oval 10  & 11 sp

Chain fairly new over and just checked no where near worn, it is a kmc though, but never had an issue with round chainring, tried with clutch on/off , might try the original xt chain(only changed to kmc for gold blingyness)

Yup it a boost offset and is a shimano direct mount specific for 12sp hg+

I used gt85 to take the gloss off of a plastic mudguard, worked a treat,would recommend patience though, £20 mudguard and £1k + door are different beasts

Beat me to it.Was just typing a vote John Cooper Clarke

🤣just practical

The magical steel bannana tree(its a sturdy tree)

At least you could have forced a smile, through the grimace🤷🏼‍♂️

Doesnt work for me, says narrow, and measured sit bones indicate wide, use a wide volt and m/L ergon = happy arse here

Mint choc chip Poos with tennis balls, welcome Lola!

Also use the Mr Herriot method works a treat, never occured to me to put a bag on my hand though🤦🏼‍♂️

Peters and Lee ,Gt Yarmouth early 70’s

Might be more concerned, as to what they used as the jacking point🤦🏼‍♂️

I blame Mike Reid, “Run around now”

Goppin, agree with the Trump combover quiff styling.

Also my Missus pointed out if you look at the side profile,right to left it looks like a certain Ridley Scott alien

Agreed, horrid way to go, many happy hours watching Her as Olive,RIP