I reported the trek to gumtree, so that was removed. I always check gumtree for stuff like this

cool, cant wait to get my proflex frame and start the project. is all 3 trails do-able in 7 hours at afan. then the same at bechfa

going to be interesting on my new project – 1997 proflex beast

ok, thinking of doing afan on sat and brecfa on the sun, do 3 of the trails at each i reckon, if got 7 hours to do it. or is that to much of a stretch

yeah done that, the star fangled nut has moved as well by an inch.

With the fork rocking – i got enough spacers in there. Would it be the lower cup race, bearings need replacing

ok will do

Karrimor boots from sports direct. got a pair for £30 and had for near 2 years and they are brill. Comfy and waterproof. Or if you can find head walking boots, had a pair for 6 year and used everyday and they where gore-tex

why is fox so highly rated, you need to service them everyday for optimal performance. i had marzocchi mx comps from 2004, had for 5 year and never serviced – they worked perfectly. Also had rst mozo pros for 3 year, never serviced and build quality is really good (they get slagged off a lot) got a pair now which work much better than a pair of recons i had. so thats that.

For a 32gb your looking around £70-£80. A 16gb would be around £30.

http://www.mobymemory.com/micro-SD.asp

try co-op, i got the other day. asda or tesco online?

The headtorch from tesco, i got one but havent tried it yet.

so if i put in a 7.5wt oil, they be fine and not to use silkolene and fiddle around with the rebound

I find my marzocchi's now are sticky and less sensitive. What to do, as i have used that sikolene 5wt oil. maybe use stendec oil or something?

what oil should i put in them

this:

http://www.chainreactioncycles.com/Models.aspx?PartnerID=79&ModelID=112

Yeah i am using silkolene 5wt, dam expensive stuff and dont want to take them apart again. now to sort out my rebound and sensitivity

bump

All done, spacer removed and they are 120 now 🙂

When i took them apart, i was shocked by the build quality of the push rods and stuff. Crap stuff.

Just get my rebound sorted now and they are a bit sticky! Not sure why.

What sort of air pressure, i usually have 50 psi in each side for a 95kg rider. is that a bit ott

mine are air, so i put it on top of the rebound spring

Remove bushing (4), the rebound spring (7) and the preload tube (9) (only for models with 105mm
travel) from the pumping element.

swap around

hmmmm. so take the sleeve from under the rebound spring and on-top of the rebound spring

So, where the preload sleeve is under the rebound spring. swap around so that the preload sleeve is on top of the rebound spring

This is the marzocchi mx comp 2006 manual

http://www.wheresweyland.com/images/2006_marzocchi_service_manuals/2006-mx-comp.pdf

On page 18 there is a diagram of the right pumping element. it has a preload tube which is on 105mm models, but not on the 120mm models. this is same with the left pumping element.

I am not sure about this, so I could be wrong. A quick answer would be loco tuning, see what they say. If somebody wants to ask…

The waterproof trousers are really good too. i had pair that lasted 2 years and got another pair this morning. So busy in bristol southmead one, like wasps around a nest

maybe some 1.5 tyres

something like
http://www.chainreactioncycles.com/Models.aspx?PartnerID=79&ModelID=25906

OR

panaracer mach ss, which are really good road, they are a 1.95

on the right side there is a adjuster for the compression damping into lockout and thats not working.

Think i may give up, back to my reliable marzocchi mx comps. i just wanted a bit more travel

its a unbranded seat, some crap, would replace it but cant afford. mp3 louder then!

cleaned and lightly greased the clamp. still squeaks

This one is good

http://www.argos.co.uk/static/Product/partNumber/9009600/c_1/1%7Ccategory_root%7CHome+entertainment+and+sat+nav%7C14419512/c_2/3%7Ccat_15701190%7CMP3+and+MP4+players%7C14419653.htm

£29.99 for a 8gb

I can get 200 for a £1… !!!

so wtf is it about. marketing hype/crap

I just rode – ashton court and 50 acre. my local trails. was a blast and dried out abit now which is good

Avast for free

bump, anyone.

openoffice for office and avast for anti-virus

I tried that site, they seem quite good.

Maybe a 6v ni-ah/ni-cad 2000mah would be ok for a battery

Send free txts from here:

http://www.cbfsms.com

Oh ok

No thanks, im ok

I cant get the drive side out and the plastic bits comes out of the non drive side. what to do now

there is a gap between the shoulder and bb shell. so looks like bike shop job.

dam, was hoping to do most of the bike at home. well it is a old frame – 1992 gt outpost

I have loosen off the plastic adapter and the drive side is still and wont move left or right, still quite a bit of thread left. What to do now

bump