Possible help – have sold all three Vaux/Nissan/Renault versions all the same van as stated. But the Nissan used to come with more toys/equipment as std. Each Manufacturer would specify different equipment levels to stand out from each other. The Nissan also had a better warranty as std.

I have Endura Singletrack 3/4’s and think they are superb had mine around 2 yrs and still going strong.

Today’s as it was a cheeky blue sky sunshine dust :D

No doesn’t feel or ride tank like at all . And I found myself steadily giving the Mojo a burlier build as time went on, hence looking at the Mojo HD

Like this one as well in a simple un-cluttered way

Not keen on those loddrik but thanks

Sounds good im in West Yorkshire and by the sounds of it some where central might work for all ?

Dave I got the brakes anodized my self just supplied Neil with all the parts . Tyre clearance wise I believe they have improved the clearance they are 2.25 _Nics on flow rims so they sit nice and wide no where near to being close, could go bigger easily

Will mainly use the bike at 116 & 129 mm at the rear and run the Revs at 120 up to the warranted 140 mm so will have some un-used travel .

Yes a Nicolai forum ride would be good , reasoning behind the CC over an AC. Very nearly went for an AC as I thought that was what I wanted as I was about to buy a Mojo HD . Then thought about the riding I do and liked the adjustability of the travel so perfect in short travel for local rides, and then open it up for bigger days away Lakes etc. Then saw a thread on MTBR discussing the change in geometry between the CC and the AC the CC seemed the more flexible frame. And I have no fears over its strength as you’ll know built like a tank and more than capable of riding anything in the UK.
Infact I think they are a pretty good UK bike full stop full length outers shock out of the way of crap etc.

Yep Buck Woods

Yes it’s a EC90 post came across from the Mojo. Things noticed allready it’s a very quiet bike somehow even compared to carbon frames ive had before. And it rides lighter than it is very pleased with it.

Yea just need some time to ride now !

Would do but waiting on my new frame have all the bits sat waiting. Have a look over on mtbr Nicolai forum loads of pics and advice.

Thats not good will stop thinking of a cheeky pasty now !

Could well be Junkyard

Would need to be whale sized

It’s a possibility but even for me it’s far too grand 8O

Not sure why it got through all my layers of protection either ?

And it concerns me that malware reported it removed and all seems well, and yet it re-appeared. Which resulted in having to run it again and clear again. Just feel it’s still here somehow im considering a re-install of the OS.

Had this the other night came up as spyware / anti virus site called system tool.

Reporting my pc had god knows what and that I needed to purchase the full system.

As said above start pc in safe mode with networking

In fact heres a link to the walk through I found.

http://www.spyware-techie.com/system-tool-2011-removal-guide/

I ran malware and it found them and rinsed them out. Thought all was well and then it popped back up again the other night. Ran malware again and it found them and got rid again, but im not convinced ive seen the last of it.

Superb looking build nice colour waiting for mine now first Nicolai for me :D

My Loves

Perfect

A suuny day on our bikes.

Getting away from things

My up coming new build **Not my pic / bike**

Agree with OP superb voice love the album 21

Waiting to try myself where have you found them in stock ? I can’t find them anywhere.

Cheers

Terrible cusutomer support and terrible products. Purchased the RC40 XCAM when it was fist released. It failed countless times and was sent away, every time it was returned it would fail again after a few rides.

In the end I contacted Mr Carter to express my concerns at being a guinea pig, for a new to market fork that didn’t work !

The letter I got back said it all and on the back of it I managed to sell them and have not nor will not ever deal with them again.

Had friends with Pace products that have also failed.

Such a shame as they look great but are made of cheese.

You pays your money you takes your choice.

As above just a superb bike I had this one

Which I sold on then found that I regretted it that much that I built this one;

A classic bike

YHM psycle

I attach the same bag with the velcro strap to the sternum strap on my camel back. Then have a small spring loaded clip that secures the bag to a buckle on the camel back.
Perhaps overkill but very secure.

Have had the older Mini’s and M4’s and now have Tech 4’s X2’s and Tech V2’s across my bikes. I find them superb for power and modulation and the backup.

Use mine with the Hope matchmaker clamps for XT and XTR shifters

Will not be looking elesewhere.

Welcome to the forum Steve

Yes strips lever body and caliper internals then re-build.

Have emailed everybody any body else my mail is in my profile.

Thanks

sent you a mail Houns

Your not wrong Trimix :D

Jamie they were just standard Hope brakes and mounts etc silver with black bore caps etc.

Have x2’s on one bike and they are superb, quality power the lot.

Second bike tech m4 and tech v2 once again superb.

Would not have anything else now. Have tried Avids and never again anyone for “turkey warble”

Have just sent some components off for anodising to Steve. Superb communiction by email from him and great prices.

Could you point me to a link for Steve/Acorn please.

Funny I was just thinking you may know somebody Trout.

Also interested have sent mail to craigxxl

I too am looking at these tyres along the lines of the Rubber Queen 2.2 in black chilli protection at the front. Paired to a new Mountain King chilli protection at the rear.

I can give some idea of the sizing after an email from Continental today.

The 2.2 Rubber Queen is around the same size as the new Mountain King 2.4.

And the new Mountain King 2.4 is smaller than the original MK 2.4.

Hope that helps somebody