Fish tank airline from local aqaurium shop

Use senditnow.com they just ask for weight. Think usual cost is about £12

isohunt?

yeah iscg old

http://www.e13components.com/iscg_explained.html
this should help

think iscg 05 is 55.92 apart

measure from centre of bolt hole to centre of bolt hole

sorry yeah mm

thats the gap between em

measure the holes, if they measure 47.7 its old

try this http://www.parktool.com/repair/readcalvinscorner.asp?id=226

same as pike i think, good guide on park tool site

As its a tape it can be wrapped more than once, so can be as thick as you like i suppose, no personal experience tho sorry

Bike tart at a guess

@ delusional i see by your post on what 5-6 freeride bike you are riding a pitch, this is also a pike 351 on a pitch pro

And again many thanks for your help!

3 weeks!! bought mine from evans so doesnt look good does it, might be less hassle to do it myself, what seals do i need and where from?

Thanks everyone much appreciated!

Hi trout, only bout 6 month old used once a week at most,never used the u turn tbh and never lock them out

Warranty cover this is or am i gonna need pull em apart?

Forgot to mention these are coil forks, buggered seal would apply to air?

Thanks Andy, turned the fork the right way up so guess i lost all the oil,was quite a bit come out, wanted to change oil completely in lowers anyway.
Thanks again.

I'll try 30 spring side and 160 damper side as per fox instructions, seems bit weird when my pikes only use 15

Thanks for replies, I thought the same plecostomus that 5 ml was correct but more than that came out, the service help above just gives a link to oil volume table which says 30 ml in 1 and 160 in other but that seems a lot to me, as i thought only 5 ml as plec said

Was bitten at the lakes while camping couple of weeks ago, but im a midge magnet, im the best repellant for others around me :roll:

Been bit by midges using this but less,never had a tick while using autan but have when ive not bothered putting it on, may just be coincidence tho

that cable is gona get real tight under your bb on full compression of your suspension

@ grumm
cable routing looks fairly tight under your bb, maybe the reason your going through as many cables??? just a thought. mine has quite a large loop underneath
sean

Hi, all specialized bikes use the iscg old

its the e13 ds i bought for dual ring, even if i bb mount it without fixing to tabs it looks damn close to the stay, maybe no good by the looks of it

thanks for the replies! would think the pitch is the same as enduro so will give mrp or gamut a try

according to specialized site i have iscg old on my pitch, ive bought iscg old from crc, but still appears to only fit behind the bb cup and not on the iscg tabs??