Dont think it looks too bad in the new colour, prob better in the flesh/metal.

Its what should be on the pitch imho.
Heres mine with marz 55 rc3 ti’s as carbon says it rides very nice.

If you dont buy a thomson post it wont match your stem? :roll:

pro2 on stans flow…

+1 vacuum fitting

I had a fault on some 2009 55 rc3’s, they tried twice to fix the leak and failed, on the third time they were replaced for 2010 55rc3 ti’s which a worlds apart from the 2009 version.
All this was dealt with very well by Tony at merlin cycles and windwave.
Cant grumble really :lol:

As said above, just the oil from the sponge and wiper seal with them being new, they do this when you do a wiper seal service if you put plenty on.

73 Leighton Rd, Wing, Leighton Buzzard LU7 0NN 0845 850 5505 () ?

Any good?

Then buy a big dog for when they return

Take it out if possible then put it in the freezer for a while.

New inners possibly outers too

The plastic tube from a vacuum cleaner works a treat, just the right size, well mine was anyway! :wink:

Edit: thats for putting it back on obviously.

Here you go, cheap and very sharp!
http://www.screwfix.com/prods/47997/Hand-Tools/Pliers-Cutters/Cable-Wire-Cutters/Cable-Cutters-240mm

Any good to you?
http://pondering-panda.blogspot.com/2008/09/tutorial-fork-service-rockshox-pike-426.html

+1 newcastle o2 acadamy, cant wait :lol:

@paul78, have you tried indespension in shiremoor? seem fairly reasonable when i was looking

Watch the bag police dont get her :lol:

Dont think any of the new bombers change travel via a dial or switch etc.
Not sure i would trust them if they did tbh

Aye sure thats what he put on his bottlerocket he built up, nearly sure.

Ask jedi carl, he runs them on his transition

Quite short, we normally do kielder then newcastelton to make more of a day of it.
Only about 15 mile drive apart so worth it.
some nice singletrack at the start of it

The 55 rc3 ti has a coil preload as well as the air…

Here you go try this:
http://www.locotuning.co.uk/

+1 stans flow, very stiff and strong rim.

Also use deb jizer, great stuff.

I’ve seen this yesterday and compared to my mech which is new, the spring feels very soft, was also a little play in the pivot compared to mine.

+1 swampthing :wink:

If its under three year old send it back, microsoft cover them for 3 year for that. unless of course its second hand!

Agree on that! the manual may as well be in japanese, but they aint that complicated to set up

Ive got the 55 rc3 ti’s and they’re very nice forks, would think the 44’s are also as good!

Wouldnt think the seals should fail within 3 months myself.
Had a seal fail on moco cart on a pike before and it was replaced no problem on warranty

They are wire bead and quite heavy (not sure of weight) but very good tyres for winter, and well worth £17.99 imho

Everything ive bought from there usually comes in a box way too big for item

As far as i know you can get diff weight springs for the 2010 version

Bit overkill for some screw holes maybe? :roll:

For bigger areas use a caulking board instead of filling knives.

Use interior pollyfilla only, use flexible filling knives and you cant go wrong. fill slightly proud then sand flat

Shite in my experience also, on more than one occasion :roll:

Got them here but seems you have to buy all the other stuff with it 8O
http://www.chainreactioncycles.com/Models.aspx?ModelID=26186

Hose was 1300 on rear for me, which is too short on a small pitch :?