ace good on ya

my fav is my cotic simple tis ace

I would of said my old steel S/works from 1995

But after being hung up for 7 years I rebuilt it and rode it last year, it was fugging horrable steered like a barge, canti’s did not appear to work (yes they were set up properly) and the head down arse up riding position hurt like hell.

No more mist eyed for me I sold it with no regrets

Retro = backward

this one does it for me

http://www.youtube.com/watch?v=FLQMniZNSmo

mind angry kid is brilliant imho

I use a R89 D/E razor and have been trying differant blades

Wilkingson Sword felt blunt from new
Derby blades cut me to bits
Merkur blades give a ok shave
Feather/Gilette 7 oclock sharp superb.

I have tried the Bluebeards revenge shaving soap but I do not think much of it, Taylors is the one for me at about £7 a pot

Yes a good badger brush is worth it

BTW I ride a s/s Simple says it all I guess

stevede – Member
Soul if you can afford it, my inbred was much harsher than my Soul (guessing the 456 will be similar)

er no I think my 456 is harsher than my old inbred

I have a 456 and a Cotic Simple

the 456 is a holigan of a bike and the Simple is er well it makes me ride in a safer manner, it just handles differently

But yes the back end of the 456 is HARSH compared to the simple ( with the same tyres)

I would love to have a Soul but I cannot afford / justify it, but between a Carbon 456 and a Soul

Sorry the soul would win again

Weacombe 😳

120mm Mav SC32’s on mine I do not think I will go longer

Yep quite happy

oldfart – Member
wonder who she learnt it from ? x

er got any clues for us 😉

still not sure what they do

NOT THE JOB CENTRE

but would it be any better than the Tesco’s AA tourch

What batterys does it use btw

a bloody big bin bag and have a clean up

If yer feet tap when you listen to your music it’s right

AlasdairMc – Member
Buffalo Special Six when it’s really cold (it’s too warm above zero).
Pile lining and Pertex outer, with a great drop tail. I love mine for winter commuting

Agreed

But used this on saturday on the Q’s fantastic shame about my toes though

http://www.buffalosystems.co.uk/DP_Cycle_Shirt.htm

How it works

because I am forever curious

http://www.memorycardzoo.com/blog/5/What-is-Class-Speed-Rating/

this link will help

What speed card are you using?

I upgraded to a class 6 and it stopped the jitter and wear my helmet tight

I use the contour software to upload the vids no problem

😳 sorry I did not wear my glasses when I read your text Mr K

Chewkw

Read my post yer chuffing ellirot irriot I did the grind bit

BASICALLY you reduce the pressure at the grouphead, less pressure = less flow

It works .

What else do you need to know 💡

Another thread hijack I have a Gaggia Classic and it WAS ok but I found this

http://coffeesnobs.com.au/YaBB.pl?num=1143118905/0

it is a mod to a pressure valve and it WORKS and it is free

My coffee is now smoother and basicallly nice now

Please do not say I have issues with my grinding because I do not I am using a Rancillo Rocky grinder and I have tried all sorts of grinds and tamping pressures

BS 7671 is what I work off

Also known as the 17th edition wiring regs

it does not harm to go oversize on cables it is just unnecessary extra cost

bit like fishing for Minnows using tanker mooring lines realy 😉

MrOvershoot – Member
Mmmm so you run your kettle for a couple of hours at a time do you?

Ok substitute the word kettle for 3 kw fan heater/ convector heater 3kw immersion heater etc and you may get the jist of what I am saying

I have seen someone with roof mounted bikes hit a height restriction barrier at about 40mph in france not a pritty sight

Tow bar mounted for me and it makes a good work stand

I tried the feather blades with my Muhle R89 D/E razor

How bloody sharp and what a fantastic shave to which the wife agreed

Merkur blades were good but the feathers are a differant league
Derby blades just cut me to bits
Wilkingson Sword blades just feel blunt

We make our own soaps so we will make a Teatree whipped cream soap next week , see how it goes

MrOvershoot – Member
I would question only using 1.5mm even on a single oven?
2.5mm for a single oven & 4mm for a double as a minimum in my book

Sorry but you will find that 1.5mm flex is ok for a 3kw oven, your kettle is wired in 1.5mm I think you will find. 1.5mm T&E is only rated at 12A according to the regs

MrOvershoot – Member
I would question only using 1.5mm even on a single oven?
2.5mm for a single oven & 4mm for a double as a minimum in my book

Sorry but you will find that 1.5mm flex is ok for a 3kw oven, your kettle is wired in 1.5mm I think you will find. 1.5mm T&E is only rated at 12A according to the regs

sorry I am repeating myself

sorry but I cannot comment on the Day One

but my pompino is ace I love it shame I only see it 3 times a year cos it is hidden in france

I have a pair of dmrs f&r 32h silver on silver 717’s with a WI 16t freewheel if you are interested

made me chuckle yer silly sod 😀

I used one for 6 years no problem what so ever

stay on the bloody thing 😳

hope this helps folk

chewkw

I agree.

Knottie

now about my picasso 😆

Sorry sales hype imho

It is all well and good getting more air in but everything has to be balanced and you need to get the gasses out

Then have you got too lean a mixture???? etc

EDIT oops I had this thread on for 30 minutes while eating my tea ( bunny and pheasant casserole) before I replied

Now about that snake oil???????

I never thought I would buy a album with rap in it but

Plan B- the defimation of stricklands banks

Northern soul and rap unbelevable combination

I use the Muhle R89 ( thanks to a shaving post on this site last year) and I get the best shave every using it and I feel so clean afterwards

http://www.shaving-shack.com/muhle-r89-double-edged-chrome-safety-razor.html

A good razor may seem expensive and short term they are but worth every penny 10 blades for £3.00

D

please