purple aki.
I,ll raise you a smile on that one. 😀
I,m from the wirral

Sorry bud.
Thought i had it there. 🙁

Here you go bud. 😉
http://www.chainreactioncycles.com/Models.aspx?ModelID=11266

oops…Not in stock….

Better than that… 😉

+1 for ANY of trouties contraptions 😉

Just built up a pace rc305 with 150 revs.
So if somethings going to die it,s probably going to be me when the frame snaps going full pelt down a rocky section. 😆

Hahahah Kaes.

+1 baznav73
Had that hub on my 2006 fsr xc pro.

This is what you want
easton haven £40 at merlin at the mo.
http://www.merlincycles.co.uk/Bike+Shop/MTB++Parts/Bars++Stems/Handlebars+-+Riser/Easton+Haven+Alloy+Riser+Bar_HAVEN-ALU-BAR.htm

Cheers godzilla…butcher.
I,ll have a look at you recommendations now 🙂

How the hell does he do that at 3.40.
If you watch it carefully it just looks impossible.
Another rider with anti gravity boots. 😀

Lapierre.
Rode the 5 and a zesty then built a spicy instead. 😀

Really satisfying Little service job that one… 😉

Same as bud…

Your only right there TroutWrestler.
GW hahahahahaha

You two having a personal war. 😆

I did look into this bud but i don,t think you can get the cup to sit in far enough into the head tube.
As you know it,s not a strait 44mm but recessed about 10mm.
I was only after fitting a tapered fork.
I gave up in the end but i may be wrong.

Run my (08)Trance X with pikes and love it.It,s great on rocky steep bits and never unnerves me.It,s just about perfect.
I,m always amazed just how hard you can thrash these little frames and get away with it.Pikes just suit them down to the ground.
I havn,t answered you either CH. 😉

Dam….Fancied sticking the dual flow in mine.
Simon…Buy a nice fresh hacksaw blade and tailor me one up bud… 😆

prezet. Can you keep us informed as i don,t want to get rid of mine,superb forks.
would love to upgrade them to stop them chocking up as much.
Si at loco knows his stuff so this should be good… 😀
Whats the cost all in for the parts bud…

Aerodynamics ? 😀

Bought as set from onone.(2.4 i think)
1 ride and fleabayed them.Downright dangerous as just no grip at all.
Scared the bejesus out of me..

There really easy to do.
No problems at all doing my cr,s.
Just follow this and you,ll be fine.
Worth cleaning the pistons first and apply some silicon grease to them.

This be the stuff for a lower leg service.
With the right grease for the seals as well.
The top of the list but the pic is wrong for some reason.
http://www.tftunedshox.com/Miscellaneous/Oils-and-Grease

Where did you get the funky covers from jeffus 🙂

Yosh…I think it,s the way the maestro works as it soaks up more than you think it would.
140 up front is a must as it really brings these frames alive…

Not steep and even faster than **** 😀

Bit of a classy retro look 😀

Prevents overfill…

Yep…Bleed block in.Sets to pistons right.

Soft jawed vice here.
Pop off a treat.

You,d have to be on glue to believe the hype. 😀
But that Lancia is a different story.

Same as steezysix.
Ditched it along time ago for silicon spray…just sniff it now… 😉

Yep…Down here as well.
Must have gone bust… 😆

Hey Keal
Just posted this up before.
Someone had the same question.
All here bud….

http://www.freerider.ro/manuale/manual_tehnic_rock_shox_revelation.pdf

No worries Kb..
Should be all the info you need there… 🙂

Simple when you know where to look. 😉
http://www.bikeradar.com/gear/article/workshop-how-to-adjust-travel-on-a-rockshox-trail-fork–26840/

http://www.freerider.ro/manuale/manual_tehnic_rock_shox_revelation.pdf

Hope pro2, pike combination by any chance

Hired a spicy 516 out at GT for £40.
Absolutely loved the thing.
Built one up.
Best £40 iv,e ever spent.
That is the end of my story. 😀

This is why i don,t ride there anymore.
The place has overdosed on T…ers.
For some reason that place makes me cringe.
I did used to love the place a few years ago.