Just a simple rubber coated t-bar will do me..I,m easily pleased.
Also i,m tooled up to death and just need one of these. 😉

d45yth..Knew they where there somewhere…My google is weak tonight… 😉
Site please bud…

No bud.One to take a driver bit.I want to use it for hex and torx bits.
With a nice comfy handle. 🙂
Trekster .Can,t find it there either or your works guys…

b45her,s right.The spring scores the inside of the stanchion preventing an air seal.

dallas.OP mailed me so only fair he gets it…

O dear.You could have had it for nowt… 😉

I have a spare brand new front hose if this helps Paul.
Addy in profile

Anyone done this on an 08-09 spicy.

Anyone got an 08 spicy ?.Come on someone must have done this… 😉
BTW:Missed out the word (you) in title. 😳

Do any of you know if you can just replace/upgrade the headset bearings on an 08 spicy without changing the whole headset.

yep…

Cheers lads.Just been given one but thanks a lot for the offers. 😉

+1 for the 991,s.Run them on all three bikes and no problems here… 🙂

mulacs.Email loco.He,ll sort you out my friend….

Not planning on selling just now so not that bothered about resale value.
It,s performance i,m after and i think loco is the way to go on this one. 😉

Hey northwind.Think i,ll got for full out give it as much as i dare type fork… 😉

DT78..The mo-co and standard rebound shaft can get a bit overwhelmed on repeated hits.Dual flow solves this and the RTC3 damper gives better damping. 😉

Will Do minty…Should be a great fork after Si,s had his hands on it.
Whats the pike like with just the dual flow bud..

They be them… 😉

Yep 1 1/2…My frame will take it..

All ready got RTL-Ti black box revs and they are great.So hoping that the pikes should ? be just as good if not better..
I,m sold anyway and off they go to loco. 😀 Plus thinking about it i just can,t be doing with the pampering the fox need.
It was just at that price it got me thinking.

My arm is being severely twisted here… 😉
I do love the pikes though.They just feel bomb proof.With magic performed on them it will stop them packing down and keep up with some of the best 140,s out there..

They will fit but as steve said the pikes will end up superb.
The pike upgrade+full service works out about the same.
Decisions..Decisions…AAArrrrr

Cheers tomaso…Great info.External cups it is then…
big_scot_nanny.Is that because of the length of the head tube?

getonyourbike…No way… 🙂

It,s late and i,m tyred…Fixed… 😉
Cheers chaps..

Yep doubledunter…A neoguard… 😉

Just picked mine up and right next to the counter was 1/2 price large GT85 when you buy another bike item….Superb £7 for both…. 😀

Used that in the past Northwind but i got addicted to bike tools not long after that… 😆

Using the tool is a better way to put them in.There,s no reason why they could,nt have fitted them for you though.Also buy a vice.never know when you,ll need one.. 😉

Here you go.For putting in and taking out.Do not use FBH 😉
http://www.ebay.co.uk/itm/Shock-Bushing-Tool-for-rear-Fox-Rock-Shox-Marzocchi-bush-/271127473799?pt=UK_sportsleisure_cycling_bikeparts_SR&hash=item3f2074ee87

Nice one OP…reserved for pick tomorrow.Am only working round the corner from the place as well 😀

Yer you need to do a strip down.You,ve got the grease in the right place.
But you really need to check out that bearing.Those marks look very very like three roller marks to me bud…If it was me i,d defo do it as that can only get worse..
Also sounds like they where really dry by your description.

Dead easy to do.I use RSP Ultra Slick Grease from tft on mine and it works a treat.
Trick is to was them out first with de-greaser to get any crap out.Then dry it out with a hair drier to make sure you get rid of it all.Really push the new grease with your thumb and keep spinning the rollers so it gets to the back of the bearing.

Loosks like three sticking rollers in the roller bearing.
http://forums.mtbr.com/all-mountain/ummm-help-my-ks-has-turned-against-me-693558.html
http://www.watermanatwork.com/Land/Cycling/BikeShop/KSAdjSeatpost/KSAdjSeatpost.html

Nar…Just do all of this..
http://www.dhfr.ru/files/fox_dhx/VERSION%204%20-%20DHX%20Service%20guide.pdf

Good luck.. 8)

julianwilson ygm.Just a quick question about that remover bud…

Yep julianwilson ..that,s the one… 😀

Tried various big flatties put you just can,t quite get in strait because of the opposite dropout. 🙁

Just bought one of these. 😉
http://www.merlincycles.com/bike-shop/workshop-tools/workshop/workstands/park-pcs9-home-mechanic-repair-stand.html