Got a pair.There ace. 😀
At that price you just can’t go wrong.
Any problems just warranty them.

Ooops.Should have looked at the internal diameter of both. 😳
Thanks Rorschach.

Where does Dual flow come into this then as there are two rebound circuits where you can afford to have the beginning of the stoke very slow without effecting your main rebound. 😉

Which smorgasbord is suitable for all round use.
Enduro.
Trail.
Trail extreme.

hugo.As your in oz it,s probably cheaper to buy a new one. 😉

You need this
http://www.chainreactioncycles.com/Models.aspx?ModelID=18761
Bit cheaper here.
http://www.ukbikestore.co.uk/product/176/hub223/hope-pro-2-rear-10mm-thru-conversion-kit.html
I have both the DT and the superstar.
The DT and the SS are both good.I have a mint DT if you want one.
Addy in profile. 😉

I take it you’ve greased everything on the rocker.
Has the rear mech drop out bolt been mentioned.
Clutching at straws here. 🙂

AAAARRRrr….Fail…. 😀
I,m up for the £1 in the paypal tub…
rename the thread title(stw squeak and creek competition)
OP gets the tub for a new pot of grease.Sounds like he’ll need it. 😉

Come on OP.I want to know if iv,e won this.. 😉

I might have your answer here. 😀
I had an annoying creak on my rc305. Exactly the same symptoms.Forget just checking if the dropout bolts are light.Take the dropouts off and grease the inside of it where it sits flush against the frame.
I bet you this cures it as it did mine.
I went through every possible area before i found this.Must have undone re-greased and re-tightened the whole bike first.

Hahaha…Got me… 😀

Simple question really.?

Yes, but which shade of red goes fastest?

Do be soft.We all know white bikes are quicker. 🙂

Animal size chart.
http://shop.animal.co.uk/page/sizechart/

No reason not to.I already have a pair.There not that baggy and i to am a 30 waist.The small is bang on 30 so if you wear a liner the are a little bit tight.Iv’e just ordered a medium if that helps.
Grim is probably right abought baggieness as his are an xl. 😉

Superb.
Cheers OP. 😀

Two burners here.Black camo for muddy rides white camo for summer.well if we get one.
Really nice to wear.No problems here.

Does this qualify. 😀

One on each leg to make sure your forks are balanced. 😉

Hahaha.Not that old chestnut NW.It’s just all gone pear shaped.Have to pump the neg to like 50-60 psi more to get them to pull 2mm into the travel so i know there balanced or near enough when i take off the pump.It,s loosing the 50=60 psi out of the chamber just undoing it.If i don,t unscrew it super fast it just empties the -ve.
I know the pumps fine as i,m using it on other forks/shocks.
Sticky valve.?
Feels like it’s just not shutting quick enough.

Brand new fox pump NW.My pikes are burning my brain trying to get the -ve right.They where easy until i had them serviced and upgraded by Si at loco.I,ll give him a tinkle..

How is that done.I can’t even see that fast… 😕

I to have a KSi950 and a 2013 reverb.Nothing between them really.
They both work superbly.Treat the KS to some tlc every now and again and it runs flawlessly.

Do you know if they will do the hubs in a color honourablegeorge.

What’s winstanleys build quality like?.On par with merlins or are they bought in.
Forget that.Just read there from hope direct.

£370 from Merlin though…Not cheap.wouldn’t it be a lot cheaper to do this the other way..

I was thinking that…

Have you tried the vid.

You might need it to shorten the hose but you should be ok..

Go on then.How much was the build.. 😉

I would have refused to let him go anywhere near my property in the first place.
Do you owe your neighbor some kind of favor …Fatal mistake.

Wearing some rct3 pikes.
Sometimes wears rtl ti d/p 150 revs.
The pikes are much better though.
There’s a wee offset bush in there somewhere. 😉

Loving this one though..

That’s good to hear robarnold as i’m waiting for mine to arrive from the Zee mother land… 😀

Is it just me as when i see a for sale link to PB i just thing it’s dodgy…. 😕

Just how cool is that. 😀

LOCO

Mole grips. 🙂

Yey…A T9 torx bit removes a kapooshed 2mm alen bolt… Success
Cheers gmex619..

It’s a cartridge bearing that only half exited. 😉

+1 for off road climbs.More efficient and not as harsh as true lockout.