I would ring them curtisthecat as they really are that good.
I used to swear by the kevlars until i started using these.There really is no comparison.The friction these have is very very good.

Ooops..Missed that one. 😳
What a bummer as they really are spot on.
I’d call them to see if they can get them in time..
01709 710730

Tut tut tut..People for you… 🙁

No brainer.
These walk all over the ss kevlar pads.There the best iv’e ever used.
Good enough for peaty. 😉
They WILL stick you over the bars.
http://www.uberbikecomponents.com/category/426/View-all-Race-Matrix-Disc-Brake-Pads-here

Don’t worry about any code bud.
These fit strait in and there really good bearings.Iv’e got them in two of my hope headsets.One set has been in for about 2 years and there still perfect.All iv’e done is pop the seals once in a while clean them out and refill with grease.

If it’s semi integrated these are the wee fellas you need.
http://www.chainreactioncycles.com/Models.aspx?ModelID=11266

^ +1.
That’s what i use and there spot on.

This is what you want. 😀
My 426 air u-turn pikes with RCT3 and dual flow dampers.They are absolutely superb.Think it would be hard to replace them with anything that can match them.
They just feel so right.The damping is right up there and track a lot better than my 2012 revs.
As was said above the bit of extra weight adds to there performance as well.
I could have bought a new pair of forks for the price of the upgrade but really glad i didn’t…

All done.Parcelforce 24…
Cheers..

yer was going to avoid yodel as they seem just too cheap.

No brainer on this one.
These are simply superb.Better than any iv’e tried before and iv’e tried the lot..
http://www.uberbikecomponents.com/category/426/View-all-Race-Matrix-Disc-Brake-Pads-here

Pump them out.Spray with silicone spray.Clean off more spray.push back in.Repeat until free.
Clean again the apply hunters silicone grease clean and repeat.
You will get there…

Yep.New bearings and a good check over for alignment. 🙂

I too have give in to temptation after many years or resisting.I just couldn’t say no as i bought it off here for really silly money. 😀
Back to orange for a repaint this week.
They do look really bland with no decals though.

All you need is a plastic bag,Jiffy bag and £4.10
Post it to loco….No more problem and peace of mine it wont screw up ever again….:wink:

Built mine burly to use as mentioned above. 🙂
You can use it as a do it all but mine was not built for that purpose.They are superb bikes…Go out and enjoy…
Now sporting a Ti spring and dropper.
There not xc frames.Got a trance x and the hardtail for that kind of riding.

+1^ for the rawl bolt method…Dead simple..

Superb…Thanks cp..
Info now received………End of thread… 😆

So is this all i need when eventually i snap mine. 🙂
http://www.fisheroutdoor.co.uk//product.asp?category=750&part_no=R5016020A&find_category=750&find_description=&find_part_desc=
I can stomach a 40 spot but £100.???
As said.You might as well buy a new post..

There was a forum for salt and pepper pot collectors called movers and shakers.It’s been renamed now.
My dad used to collect them.O how i took the mickey
You could try there. 😉

That it be.
Black adder.. 🙂

Yup…

Same as ^ here..

What do you mean by rubbing.?
The dry sound is internal.

Any ideas on this one yet..

KS i950.

My mates had bomers but i bought a Team murray Baja.
Loved that bike. 🙂

Removing it is one pain in the arse.Good luck.. 😉

http://www.tesco.com/direct/unibond-grout-reviver-pen-7ml/212-8122.prd?pageLevel=&skuId=212-8122&kpid=212-8122&sc_cmp=ppc_g__&gclid=CJ6bqfWI-7cCFVMQtAodmloAew
You can also get it at good builders merchants and tile shops.
We use it quite often to spruce up bathrooms after dirty tenants..

Try google images.Should get a view of it somewhere.
Here you go.
http://www.google.co.uk/search?q=Raleigh+Bomber&source=lnms&tbm=isch&sa=X&ei=Og3HUbKHHMPX0QWu8YDQDA&sqi=2&ved=0CAcQ_AUoAQ&biw=1600&bih=799

Well that answers my question.. 🙂

I have a pair of these sitting waiting to go on.Are they better as just a rear or good for both..

Think i might just do that.
I like buying and selling on here though.. 😉

Mosey.It looks it.
Probably heat it right up before even trying to get this lump on.. 😉

I,ll give a few a ring in the morning.Dob’t really have the time to go round trying to get one.Cheers for the suggestions guys.
Don’t do Birkenhead cycles though as there a bunch of stitching b******S.

Sorry guys..Think iv’e just had a touch of Alzheimers regarding the race….. 😀

bearnecessities .You can have the chest of drawers but not the contents.It’s full of my bike clothes pads etc.
Go one then i’ll throw in the pedal bin as well
You don’t drive too hard a deal as you never asked for me lids and bike fetling music box…. 😉
So do you reckon one and a half is about right.?

Good idea..

No problem with this one but as you said though.

Now that is funny…. 😆