Forum Replies Created

Viewing 40 posts - 601 through 640 (of 2,644 total)
  • Nils Amelinckx, Rider Resilience Founder and all round nice guy: 1987-2023
  • robhughes
    Free Member

    Just received these and must say they are superb.The issue with the poxy outward bearing is easily fixable by replacing it with a 2rs bearing.I’m sourcing a couple as wee speak.Much nicer and a lot lighter than the nanos which are coming off. 🙂

    robhughes
    Free Member

    Funny how that frame is basically the same as my spicy.

    robhughes
    Free Member

    Worth a put at £27 so got a pair.Cheers for the info OP and NW and i’m sure i can bodge them no problem. 😉

    robhughes
    Free Member

    Go on.Spoil your self and buy a Liberator.
    You only live once. 😀

    robhughes
    Free Member

    Do tell. 😀

    robhughes
    Free Member

    I must stop being so indecisive.Andy if i sell those i’ll give you a shout.

    robhughes
    Free Member

    chestrockwell.You really are a kill joy arn’t you.Lighten up.
    Buzz killington comes to mind.Come on…Tell us a lovely story about a bridge… 😉

    robhughes
    Free Member

    chip means the dual position ones Rob..

    robhughes
    Free Member

    Iv’e got the Blackbox RTL Ti D/P’s and they too have been faultless.

    robhughes
    Free Member

    Madness.This one lets you ride in various south wales trail centers.
    http://www.mofunzone.com/online_games/mountain_bike_extreme_adventure.shtml

    robhughes
    Free Member

    Ooops.Double post.

    robhughes
    Free Member

    no

    robhughes
    Free Member

    stu.I,ve mailed you about that ks post you where after

    robhughes
    Free Member

    I’ve got the TF heavy duty ones on one bike.It just sits there doing it’s thing.No real life changer.

    robhughes
    Free Member

    Glad the link was of help.Easy when you know how to bleed them proper. 😉

    robhughes
    Free Member

    Did you follow this to the letter.
    http://www.youtube.com/watch?v=MsRlj_JJ8t0

    robhughes
    Free Member

    robhughes
    Free Member

    That,s where i was going Goldigger.

    robhughes
    Free Member

    Where did you buy them from.I’m just about to click the button on a set.
    I’d have thought they might have give them a quick check for you first.

    robhughes
    Free Member

    Pace Rc305 because i have a mint one i the loft and there must only be one more out there because they all snapped… 😉

    robhughes
    Free Member

    I have a pimped up 516 spicy and 2011 five.Both built from the frame up.
    There both superb bikes to ride and great fun.The Spicy if you want to really push it as it will take anything you can throw at it.Well anything i can throw at it.They both ride really very similar so it’s hard to pick which one to ride.
    I also have an 08 Trance X1 again built from the frame up with 140 rct3 pikes(08)thanks to loco,offset top bush and some nice build bits.
    Now that wee bike is just superb an i’ll echo what has been said about it being a five chaser.It is a very quick nimble and tough little machine.
    I can ride that a lot quicker than either of the other two but when the going gets tough it’s time for the spicy to play out… 😀

    robhughes
    Free Member

    JCL.Don’t complicate it for him.Start with the rebound first…..

    robhughes
    Free Member

    That’s just a classic rebound too fast me thinks.
    Shut it right off then back off 2 clicks then take it from there.

    robhughes
    Free Member

    Wally.It’s the pro2.Some of the older ones hate 15 and 20mm.It’s a tolerance issue with the adapters.Hope know about this one.
    I have one of these pain in the arse hubs.There have been threads about it on here.I narrowed it down by putting another front wheel in with a newer pro2 hub and it totally disappeared.
    Grab the top of the wheel and gently rock it from side to side.You will feel the play.This translates that when you pull the front brake and rock the wheel it feels like the bushings or the headset.Might take you a couple of attempts to feel it.

    robhughes
    Free Member

    Give it to this wee chap. 😉

    robhughes
    Free Member

    Is it a pro2 hub by any chance

    robhughes
    Free Member

    Yer NW.Bad choice.Think i’ll bin that idea.

    robhughes
    Free Member

    Or a giro feature.
    I never can make my mind up.. 🙂

    robhughes
    Free Member

    Thanks for all the replies.Phoned the cyclesurgery near mine before and they have a sweet fixer in stock in my size so i’ll go and try it on.If all is good i might get the MIPS version off them.
    One of these wee fellows.I know it’s silly money but what the hell.You only live once.. 😉
    http://www.cyclesurgery.com/sweet-protection-fixer-mips-full-carbon-mtb-helmet/helmets/bikes-components-bikewear/fcp-product/49231?listing=true
    Or an urge.We’ll see
    http://www.cyclesurgery.com/urge-all-mountain-helmet/helmets/bikes-components-bikewear/fcp-product/45072?listing=true

    robhughes
    Free Member

    All gone now

    robhughes
    Free Member

    That,s the thing.Been trying to find some good reviews on the Sweet fixer as i’m leaning towards one of those.

    robhughes
    Free Member

    Can you paint the over the on-one on the side.. 😆

    robhughes
    Free Member

    Good here init… 😉

    robhughes
    Free Member

    Shaft stuck.Chuck the lowers on.Pump them up to about 140 psi then try.

    robhughes
    Free Member

    Did you measure the fluid you took out.?

    robhughes
    Free Member

    Cheers.POC Index flow gloves bought… 😀

    robhughes
    Free Member

    Yep +1 for the pcs9.I have one and you can’t go wrong.

    robhughes
    Free Member

    No.You bombed our chippys….

Viewing 40 posts - 601 through 640 (of 2,644 total)