Forum Replies Created

Viewing 40 posts - 8,161 through 8,200 (of 8,204 total)
  • First Look: New Stamp Flat Pedals From Crank Brothers
  • retro83
    Free Member

    I’m 13.5 and find the firm too soft (around 40% sag when standing) …

    I think that there is probably a bit of variance between any two springs of the same weight tho.

    retro83
    Free Member

    How much for the Pike X-Firm spring?

    retro83
    Free Member

    I use Juice 185 rotors with SLX brakes. I use the Avid 160-185 adapter, and the Shimano bolts (no conical washers). Fits and works perfectly.

    retro83
    Free Member

    Just make sure you keep the fork horizontal after taking the uturn cap, bearings etc out otherwise you’ll lose all the semibath oil out of the lowers! :-)

    retro83
    Free Member

    yep normal

    retro83
    Free Member

    when was the latest issue sent out to subscribers? i can’t remember getting one recently :?

    retro83
    Free Member

    £470! How much were the forks originally?

    blimey, i just had a look at the cost of Rock Shox forks on Merlin – 20mm revs are £640! 8O

    retro83
    Free Member

    RSP ultra slick

    retro83
    Free Member

    tried holding menu and select for a few secs to reset it?

    retro83
    Free Member

    anybody got a photo of the failure?

    retro83
    Free Member

    Ah ballbags. Just bought one. :|

    retro83
    Free Member

    Hmmm, can’t find that deal, it’s buy both together, get them half price.

    Saves about a tenner over CRC’s already good price so not bad I suppose!

    retro83
    Free Member

    Nice one, cheers fellas

    retro83
    Free Member

    have a google for a free app called ‘peer gauardian’

    Only blocks suspected IP ranges, the investigators could run their logging tools from any IP they wanted to. All they have to do is connect to the tracker and they can get a list of all the IP addresses in the swarm.

    retro83
    Free Member

    will ti bolts make my 35lb bike a 22lb racing snake?

    No, you need carbon headset spacers too

    retro83
    Free Member

    I always find 20-30% sag measured when sitting is far too much. I like mine to have about 30% when standing.

    retro83
    Free Member

    I use my SLX brakes with Avid 185 rotors. Seems to work perfectly well even when the discs are hot.

    I use the Avid IS to Postmount adapters (not sure if they’re a different size to the shimano adaptors or if the avid calliper itself is a different size?)

    retro83
    Free Member

    My Pro 2s came out of the factory with lateral play in the bearings. Not best pleased to say the least.
    Having said that, the aftersales service was good.

    retro83
    Free Member

    Yes Danbury is rubbish, don’t bother

    retro83
    Free Member

    Over rated, Crap battery life and fatigue, A company that like to hide problems under the carpet rather than deal with them face on.

    Spec to £ is totally over rated.. compare spec by spec to any pc alternative in that price bracket and you will see.

    The crap battery remark is completely wrong – I have an almost identically specced Sony Vaio and Macbook, and I get roughly half hour more from the Macbook (full brightness on both screens etc). My father has a 3 year old one used on battery every day which still holds it’s charge perfectly well.

    The problems-under-the-rug thing I can agree with, mine has a cracked case too which seems to be a design fault they refuse to acknowledge given how many I’ve seen with exactly the same fault.

    As for the price, obviously you’re paying for OSX development which is worth it IMHO.

    retro83
    Free Member

    I get about 4mbit down and 768k up, on my alledgedly up-to 16mbit connection from Sky.
    I’m quite a way from the exchange, however until they artifically limited my line recently I was getting 5 or 6.

    retro83
    Free Member

    Both bollox fell out.

    retro83
    Free Member

    install glims, it does a load of other userful stuff as well like adding fullscreen mode

    retro83
    Free Member
    retro83
    Free Member

    quite a good review of push here

    retro83
    Free Member

    i like my meta 5.5. Pretty standard build: pikes, xt, hope on 719’s, high rollers. I think it weighs 34lbs. Seems quite heavy! nice ride though. Does attract MBR types though; can’t go to a trail center without peple commenting on how there not stiff and the head angle isn’t the same as the ’07 or ’09 [:roll:]

    I have almost exactly the same build. It’s a beast! It picks up speed a little too easily tho 8O

    Back end does feel a little flexy when the wheel is rocked by hand, but I can’t notice it when riding.
    The only thing I really don’t like about it is that the paint comes off fairly easily (mines an ’08). Oh and apparently it’s a bugger to replace the main bearings on the ’08 model…

    retro83
    Free Member

    Yes very easy if you have the right tools*. If they’re new though, i’d just send them back.

    * external + internal (I think) circlip pliers , 5mm allen key, deep 24mm socket. 110ml of 5 wt oil for the damper, 15ml of 15 wt oil to replace the semibath in the lowers.

    retro83
    Free Member

    I have adjusted the compression dial with hex key on bottom of rebound adjuster and they still go solid after about 30 mm travel…. my conclusion is they are what’s commonly known as shite !
    Any other ways of tackling problem ??

    Ok, let all the air out of both chambers on the left leg. On the top of the right leg is a blue dial (this is the compression adjustment), if you turn it to fully open (anti-clockwise) and you still can’t move the fork, I bet you have a dodgy seal in the damper.
    If this is the case the damping oil will have run out into the lowers and left no room for the stanchion to move into.

    retro83
    Free Member

    Let all air out of -ve chamber at bottom of left leg, let all air out of +ve chamber at the top.
    Put air into +ve chamber until you get desired sag, then set the -ve chamber to the same +- 5psi to get the desired feel.

    Also, make sure compression dial is not closed :-)

    retro83
    Free Member

    He wasnt inappropriately touching it was he?

    I take it you’ve met johnny then!

    retro83
    Free Member

    Maybe you can have a helicoil fitted? Probably cost a fair bit tho

    retro83
    Free Member

    How does speedstack moco compare to normal moco in terms of performance?

    retro83
    Free Member

    I just wanted to burn his penis so it belongs to me and no one else

    Oh, that’s fine then

    retro83
    Free Member

    Cheap, but quite heavy (6.4lbs). Apart from the steel stanchions they look pretty good to me.

    retro83
    Free Member

    after being dragged under the bashring for 150 yards never did it again

    150 yards?! 8O

    retro83
    Free Member

    Second the Silkolene, brilliant grease. Thick, sticky and red. mmmmmmmmm

    retro83
    Free Member

    Did you install any Microsoft updates around the time it stopped working? Some of them change security settings, but I’ve not heard of them changing that specific thing before.

    Sorry I don’t have the answer, but there is loads on google about this eg:
    http://office.microsoft.com/en-us/outlook/HP030821941033.aspx

    retro83
    Free Member

    Hi Tom, I can’t seem to access my profile – I get a page not found message. Not a biggie, but I’d like to change my password at some point…ta

    retro83
    Free Member

    Do Penhydd at Afan, head to Glyncorrwyg for lunch and then do Whites Level and the Black Run loop.

    retro83
    Free Member

    You can get them online from here

    I’m not sure about which ones to go for. What colour is best for normal uk riding?

Viewing 40 posts - 8,161 through 8,200 (of 8,204 total)