Forum Replies Created

Viewing 40 posts - 41 through 80 (of 425 total)
  • Red Bull Rampage Diary 3: Go Big, But Come Home
  • philbert31
    Free Member

    ^^I agree with kane, it’s not that bad and if you’re trapping, a crash is more than likely gonna do some damage, I’d rather it wasn’t to my swede.

    philbert31
    Free Member

    Yep, that’s the one, but it also looks like the 2 piece type helmets might not be allowed either?

    philbert31
    Free Member

    I’ll have to post up some of the work I’ve done over the past few weeks! You’ll get a good idea of the finish that’s achievable with the paint I mentioned.

    philbert31
    Free Member

    We use a type of paint on our furniture that is specifically made for us, and formulated to be applied by brush/roller but leave a spray finish. If you want to know any more drop me an email .

    philbert31
    Free Member

    Use Medite rather than mdf, it’s like moisture resistant mdf, but the main benefit for me is that it has a much denser “grain”, because of this, it furs up a lot less when being machined/moulded.
    To seal edges and get a great finish simply paint edges with pva glue and sand smooth once dry.

    philbert31
    Free Member

    Crikey that takes me back to faliraki circa 2001, practically lived off them along dangerous levels of alcohol! Haven’t got a clue where to get them over here 😥

    philbert31
    Free Member

    Not sure, iMovie asked if i wanted to import so I clicked ok and thats as much as I know??

    philbert31
    Free Member

    Ta for the link, ill have a read through

    philbert31
    Free Member

    Is it possible to get the CS version? They’re an awesome bit of kit, it takes a bit of tweaking to sort out but once done it blows most others out of the water!

    philbert31
    Free Member

    Im liking the look of the Selle Italia Carbonio, it’ll save me about 100g and is reasonable priced, but will it fit in a reverbs clamps??

    philbert31
    Free Member

    I like the weight of the speed needle but it I’m not sold on the looks!

    philbert31
    Free Member

    Napalm 8)

    philbert31
    Free Member

    chorley van hire , are the cheapest by miles

    philbert31
    Free Member

    If your using a handsaw, get one with 9 teeth per inch (usually labelled as fine or for laminate), you’ll get a Bahco for about 9quid.

    philbert31
    Free Member

    😀

    philbert31
    Free Member

    Tom, you could probably give a great argument that Kryptonite is the main ingredient in Fondant Fancies, it doesn’t mean your right! 😉

    philbert31
    Free Member

    Here’s a thought, what happens if you’re a Councillor of said areas and kick up a big fuss about groups of Asian men raping and abusing young girls/women in these predominantly Asian/Muslim areas, your gonna take a serious nosedive come next elections, I don’t think it’s all about being PC, it’s also about trying to save their own necks.

    philbert31
    Free Member

    I’m not sure who but there’s already about 1000 up on roots and rain, I’d imagine there’ll be a lot more to come as well.

    philbert31
    Free Member

    Awesome weekend slightly tarnished by competitors that were an absolute shower of shite on Saturday. Bikes left all over the trails, people pushing up trails with no thought for riders coming down and people standing in massive groups on the fireroad crossing between the tape. Disgusting behaviour, some of it in my eyes should have been a DQ. No thought for anyone but themselves. Idiots

    My brother came up with me to spectate , one thing he did mention was at the bottom of first fire road crossing on stage 2, there were apparently quite a few “local” riders taking a short cut, the lady marshalling knew and turned a blind eye to it.

    philbert31
    Free Member

    Had a great day, Stage 1&2 where interesting to say the least! But I really enjoyed the whole loop, as expected my fitness was the real setback, I’ll be back next year though and firing on all cylinders!

    philbert31
    Free Member

    I’ll try and get to this, depending on the state of my legs after racing over the weekend!

    philbert31
    Free Member

    Cheers! Yeah its a cracker and one of my favourite songs to boot!

    philbert31
    Free Member

    Can anyone tell me why my link isn’t working, what I’m doing wrong ?

    philbert31
    Free Member

    philbert31
    Free Member

    Very nice, love the colour, I nearly went for anodised on mine!

    philbert31
    Free Member

    I agree, it needs to be a challenge but shouldn’t be so long/tough that by race day you’re too goosed to give it the beans!

    philbert31
    Free Member

    Quality thread!! 😀

    Michael Moranis is pearler!

    philbert31
    Free Member

    I was never a fan of the HDs, I’ve been using the Front tyre the Crossmax wheels came , its pretty good but it clogs up pretty bad if its muddy which is a bit of a worry for the weekend.

    philbert31
    Free Member

    I suppose it is just guess work at the moment..

    philbert31
    Free Member

    I think im gonna stick a magic mary on the front, seems to pretty good in mud and everything else?

    philbert31
    Free Member

    I’m definitely starting to look forward to it now, its a while since I’ve ridden up there so its gonna be fun! What kind of overall loop distance is it likely to be?

    philbert31
    Free Member

    You only get one life pal, do what makes YOU happy!

    philbert31
    Free Member

    It has always amazed me that they’ve never got into MTB earlier, hopefully they won’t be Specialized only.

    philbert31
    Free Member

    MRA = Militant Rambler Arseholes, the same ones that dismantle dry stone walls to build speed bumps across trails to protect them from us, not realising the irony.

    WW, if you headed along the Belmont rd bridleway (to the right of the start of the ICR) away from the pigeon tower, part way down is the woods to the left, it was in there.

    philbert31
    Free Member

    UU destroyed it a while ago, i think they’d been getting complaints off the MRAs. Hopefully something can be agreed with UU and get it rebuilt in the future.

    philbert31
    Free Member

    Ps. I might be selling my kapex 120 if your interested? (Im replacing mine with 110v)

    philbert31
    Free Member

    Nothing even comes close to the Kapex, if you can afford/warrant Festool then go for it, I’ve been using their gear daily for over twelve years and its never missed a beat. with the exception of the drywall sander and Domino XL, i think i have pretty much everything they do. It is expensive but you get what you pay for!

    philbert31
    Free Member

    I’ve done my back in yesterday so I won’t be able to make it, was looking forward to it too!

    philbert31
    Free Member

    Cark?? its not gonna be that hard surely lol!

    In all seriousness I’m not sure, theres a good campsite in Peebles though about a two minute walk from the High st.

    philbert31
    Free Member

    It’ll be my first go at this one, although I’ve rode glentess and inners before, looking forward to it, just hope my fitness is good enough, i had a bit of a nightmare at the Ard Rock last weekend lol

Viewing 40 posts - 41 through 80 (of 425 total)