I would say speak to Ben at Shark Performance. We use him and Miko to map our cars in our VW Cup cars. They have about 70% of the field and everyone has praise for their service and support. They attend every round and give advice which is above and beyond any of the other mapping companies do. Tell him Neil from Maximum Motorsport sent you.

Smudge at MTBBatteries sorted all my batteries and connectors

A few kettles of boiling water poured over it and then try and push it out from behind.

There is a boat launching area with a tractor from what I remember. And Im pretty sure there were people in kayaks.

I did a lot of work to the truck of Dave Jenkins which Guy uses in this episode. It got rather bent after a crash at Oulton Park

Scirocco Cup car

This is the current project. It will have a 2.0 TFSI fitted next week

Speak to Smudge at MTBBatteries. He just repaired my Lupine battery.

Matt, If it the same as the Golf/Scirocco its a metric fine thread. Ive crossed threaded these loads of times on our race cars. When mounted in the car the angle that it is tapped is a lot steeper than you think. The proper bolt has a lead on the end to locate it and make it easier to start. I know it sounds brutal but we just get a bolt with a longer lead and drill out the first few threads. Where are you based..?

This is not the one I had fitted but same idea. Theres two options, one that is just on or off and the one I got that has a remote and you set the humidity.

http://www.i-sells.co.uk/eclipse-heat-recovery-ventilator-bm3012?gclid=CMjr8v29troCFfMctAoddGkADA

My flat, which I rent out, suffered badly with condensation as it is a ground floor flat and my tenants would refuse to leave windows open. Fitted two heat exchanging fans before last tenant moved in and Ive had no problems at all. Cost me £900 to have the two fitted but it saved me that in redecoration costs after old tenants moved out. New tenant has just extended for another year so she must be happy aswell.

I got ours from Competition Supplies @ Silverstone.

We use something similar to this on one of our race cars as a starting aid for one of our drivers who is disabled

http://www.ebay.co.uk/itm/12V-LINE-LOCK-BRAKE-LOCK-Tow-Truck-Off-Road-Racing-Line-pressure-holds-brakes-/230689506694

Monster showers since 5am here in Cannuck. Still raining….

http://www.cyclestreets.net/journey/19677159/

This is the last thing Ive been building

Better off buying the ones you need in a better quality as Coatesy says

Bump 🙂

Cheers Heavy_Rat I’ll hunt them out. Got to pop round to Competition Supplies tomorrow so I’ll call in..

You didnt make Immy ride all of that did you..?

Heres 2 Sciroccos Ive built. Both have looked better….

I’d second BookaTrack for a fun day in their Caterhams. I know Jonny Leroux very well who owns and runs BookaTrack. If you do go that route tell him Neil Barnett from Slidesports sent you his way, might get you something but maybe not…

Ive used these on my Airborne frame

http://www.swinnertoncycles.co.uk/M-Part-Part-M-Part-Disc-Cable-Guide-Set.aspx

Im pretty sure I had an update recently but not sure what date it was released..

Have you been on Webupdater and got the latest software..?

I can fit my Titus Motolite in quite easily. A bit fiddly at first but once youve got the knack then its easy. I find it easiest to turn bike over, hook the bag over the back wheel then over the forks. Then turn over.

Just tried it on mine and works ok. Sorry doesnt help you with your problem… I use the same method as you. Save the file to my desktop and then drag it to new file. It’s called SD Track 99 when on my 800.

When I picked up my Trek the shop informed me of a small mark on the rear chainstay, to be honest I would never have seen it if I wasnt told. LBS contacted Trek and they gave me £150 off anything in the Bonty range. I would be asking for a bit more…

Ha ha, read the OP and thought you had seen Smudges latest video of him clearing a rock garden… 😉

Yeah, top bloke…

Used to travel to school on the bus passed the Reliant factory in Tamworth. Always remember lines of RS200 lined up outside….

If a dealer can make money then they will take however many cars you have.

With reference to the belt, have a google for Walsall leather. Not too far from you and still a thriving industry here.

The Garmin doesnt need a specific cable, I have 2 or 3 different ones that I can use, I lost the garmin one. When you plug the Garmin in you should get 2 boxes come up, one is the Garmin and one is the SD card. The unit will then say its charging. Open Garmin Connect and press “Upload” in the top right corner.

As Stoner says just cut slots with the angle grinder

Excitable1- yes just save the tile to the 800. There’s a limit to how many you can store, size not quantity, but I just keep one on there of my local stuff, Cannock, and then just add tiles as and when I need. I thought the same about the 1:50 maps but I use it on my road bike and prefer the 1:50 for road use.

As Clowner says you just need Mobile Atlas Creator 1.8. But make sure you download 1.8 and not 1.9 as OS maps arent available after 1.8.

My Desire updated a few days ago. Took a good hour but dont remember a warning triangle. There was a picture of a phone and it was showing that for ages…

Google problem and there seems to be a relay that can cause the problem.

http://www.focusfanatics.com/forum/showthread.php?t=145761

From start screen press the spanner, then system, then routing, then recalculate and then set to off