Forum Replies Created

Viewing 40 posts - 81 through 120 (of 195 total)
  • Podcast: Racing, Reform, and Rumours
  • naffa
    Free Member

    Just to bring this thread to an end and fior future reference I found the mech hanger on ebay model number GG21B.

    Thanks Nathan

    naffa
    Free Member

    Thanks for all the comments guys. Northwind if you could find your spare that would be great.
    I shall try to get the bike here tomorrow and I’ll have a clearer picture as it were.

    Thanks Nathan

    naffa
    Free Member

    Thanks for all the answers

    naffa
    Free Member

    Hard reset appears to have worked. Thanks for the input.

    naffa
    Free Member

    I use tech 2s with I spec 2 XT 11 speed. I just used a clamp ring from a bar grip. It works fine with no faff or expense

    naffa
    Free Member

    You can turn Bluetooth off on the 520

    naffa
    Free Member

    E-Homemade meatballs with spaghetti and Tom sauce
    D-Just finished my 3rd Tennents Super
    L-Rugby

    naffa
    Free Member

    So WHY are cranks available in different lengths?

    naffa
    Free Member

    For me its about simplicity and ease of maintainance. Had a few ht’s and decided to buy an Orbea Orcam fs which was a fantastic bike to ride but required two bearing changes through the winter months.
    Back to ht now in the form of a Spesh Carve Pro and loving my riding more than everer!

    naffa
    Free Member

    Ive held a couple of KOM’s one on Cannock Chase where the gps was obviously very very confused and one I created myself. For me now using Strava is all about beating myself, not beating others cause I dont stand a chance 🙂

    naffa
    Free Member

    I rode one of the burnt orange colored ones at the neck too. Must admit that with the exception of the Trek pro call it was the nicest bike I rode there.

    naffa
    Free Member

    I had one and it worked well once set up. I used a brake cable noodle over the lever and cable and dirt ingress was never an issue and it looked 100 times better than using an old inner tube. Only criticism is that compared to a reverb and gravity droppers the return is very slow.

    naffa
    Free Member

    Ive never visited any of their premises but their online service has always been second to non kive found

    naffa
    Free Member

    Im also in Glencoe for 7 night in early June, taking the bike too.

    naffa
    Free Member

    I fitted my I spec 2 shifter with x2 brakes using the lockring off a lock on grip. Works great and cost nothing

    naffa
    Free Member

    Thank you for sll the advice. As you can imagine hes really fed up at the moment but it seems like theres some hope. Im about to read his policy documents to find out whether the information weve been given on the phone is correct.
    If theres any more suggestions or experiences of similar please share with us.

    Thanks Nathan

    naffa
    Free Member

    Anything is surely better than nothing?
    Nothing will stop a determined thief. While riding recently we found a hardened chain with padlock still locked at the side of the road. The chain had been cut with an angle grinder.
    However you can increase the chances of getting your bike back by uv marking, tamper proof stickers etc.

    naffa
    Free Member

    I have my Hope X2’s for sale because I wanted to buy some M8000’s.
    I’ve never had a bad set of Shimanos and I’ve had few sets of Deore/Slx.
    Think I’ll keep my Hopes now though because aside from the length or shape of the lever they’re ok for me and my riding.

    naffa
    Free Member

    Cheers pembo6

    naffa
    Free Member

    Thanks for that. The forks have 100mm travel and although the head tube is tapered I’d need to check whether the forks themselves are

    naffa
    Free Member

    I’m experiencing similar problems when back pedalling in the 2 largest cogs (11-42) with a 38t zee chainset.
    Ive spent a good few hours trying to get it right today worried about riding it tomorrow but everything else about the setup works fine so I’m just gonna ride it and see how it goes. Might order the Sram chain and the front ring spacers

    naffa
    Free Member

    Yeah measure twice (or 3 times) cut once

    naffa
    Free Member

    Thanks andyl

    naffa
    Free Member

    Hi Matt I’m not buying mate but swopping my road bike for it.

    naffa
    Free Member

    All positive so far then. Any negatives.

    naffa
    Free Member

    No Gnar as its pictured in the garden and I’m banned on medical reasons from any riding. Sprayed up by yours truly and running 35mm rubber.

    naffa
    Free Member

    What length is your stem?
    Short stems on road bikes tend to cause very excitable steering and become unstable the faster you go.

    naffa
    Free Member

    Looks useful thanks.

    naffa
    Free Member

    Thanks ppl. I’ll get some carbon paste. Can you recommend an online supplier?

    naffa
    Free Member

    Dirty rider Im not so sure about your post as I’m running Ultegra 6800 shifters with a 5700 front mech without issues?

    naffa
    Free Member

    They arent loose at all its just when putting weight on them when stationary they move downward.

    naffa
    Free Member

    3 rear lights in various modes and 3 front lights in various modes.
    usually 2 each direction on the bike and 1 each direction on my helmet.
    can you have too many lights?

    naffa
    Free Member

    Im unsure why an air rifle would be illegal?
    presumably youre outside rhe uk?
    dont use an airsoft they arent up to the job and woukd cause unnecessary suffering to the quarry.

    naffa
    Free Member

    mattsccm, I think you’ve summed up what I want the tyres for.
    What size ‘touring’ or ‘hybrid’ tyres could I use on a 15mm rim?

    naffa
    Free Member

    I’ve got one for sale @ £35 posted.
    Theyre very straight forward to use and lockable.
    My favorite way of transporting the bike if I cant get it insude the car

    naffa
    Free Member

    Ok thanks guys.

    naffa
    Free Member

    At that price you couldnt really get better than a secondhand HW95k. Break barrel but with a fantastic trigger and accuracy potential.

    naffa
    Free Member

    Are these the neoprene ones?

    naffa
    Free Member

    I’ve probably got some bracers at the back of the wardrobe but I’m thinking of a tidier solution possibly

    naffa
    Free Member

    I heard there are known problems with the ecu’s which could be causing the problem. Ford may not acknowledge this but I know 2 people with 2010 Ford Mondeo 2l diesels who have had this problem.

Viewing 40 posts - 81 through 120 (of 195 total)