Forum Replies Created

Viewing 40 posts - 81 through 120 (of 249 total)
  • 502 Club Raffle no.5 Vallon, Specialized Fjällräven Bundle Worth over £750
  • How about a Curtis !

    Where abouts are you ?
    If you want to try mine for size / or ride i’am in derby so can’t be to far away from you !!

    Where abouts are you as I have a L you could try if you are near the Midlands area .

    We just need some one to offer him a frog bike now ! :lol:

    If of any help I will have a Isla Beinn 20 in large for sale in the next week or so ( purple and in very good cond )

    If you buy full bike they are around £60 area I think ( but you will need them as the one part of the frame that is crap is the qr .
    I’am on the boss rear and pike combo and very happy so fair with this set up
    but think I would of gone with arch instead of flows if I was starting afresh .
    If you are around midlands you are more than welcome to try it

    I have one and like it .
    Base model and poss next one up come with qr rear .
    You would nead a 142 12 axle kit from them which changes both rear drop outs and comes with the axle and new bearings also . It’s very easy to change the bearings in this so would also be easy with rest I would say .

    Doug would be the man to ask about bearing life .

    As for 32t is this the front ring . I have run a 32 and now 30 with I think 42 rear ( no reason why you could not run 34 or up but don’t know why you would ) !

    Charge is a great tyre and you will be fine in alps as its as tough as most DH tyres .

    :oops: oops missed that !

    Would put pic up but still don’t know how !

    Well after 5 pages and we get to Overbrurys !

    Well done LAT as that’s what I was going to post .

    Had one when the U brake came out Was a great bike but wish I had not had the u brake !!!

    QOTSA : songs of the deaf
    The Cardigans : long gone before daylight
    Pendulum : Hold your colour
    Ladyhawke : Ladyhawke

    Well I have been over twice ( to see Bream ) and ride with him and as he says its a great place to be as long as you don’t want beer and night life

    Cougar

    Top marks for that !

    Granny ring
    I might be interested in this . Let me know regards j

    Ah ok same as rallon then it just looks very slack !
    Hi Steve how was the weekend with Jim and boys ?

    Well that Rose looks like it would be a pain to climb on as seat tube is very slack ! Well it is compared to yt and rallon !
    ( just my 2p worth )
    Slack seat tube means it wants to lift the front wheel on climbs . But if you have a steep ST and slack HA with long front and short rear you get it all . Well I have with my Rallon

    Santa Cruz have a one sided lock on grip out and at £15 its very good value for money .
    Had them now for 4 rides and very impressed with them ( had odi troy lee before ) and lots of colours too .

    I used a chap called Michael bexon at park farm on 01332 556293 and so does a guy on here who is qwiet handy on a bike . ( Dvatc club)
    I have just finished 6 sesons with my back problem

    I know the base model comes with qr rear and the 142/12 dropouts are extra ( Qr is the one poor part of the frame as it feels cheap and crap . Upgrade it or go for next model up .

    As Bullroar asked is there snow / ice ? as couple of us was heading up Monday if ice free .

    The reaason I went with invisiframe i got talking to a guy selling a rune frame at peatys bike sale that had been raced in Enduro for a season or two and was like new .

    Just had my rallon done Thursday by Lee and you have to look very hard to see it , I went for the Matt as it matches the paint , kit is very well thought out .
    He also did the forks , such fantastic job at such short notice to fit me in his busy work / home life at this time .

    Have done them my self in the past (5 years ago with my last frame ) but invisiframe is unseen .

    Ps I have never meet or spoke to Lee before thursday so not trying to drum up work just give a fare and truthfull account of my findings .

    Sure Samways in Derby have a demo in 17.5 and think they are open sun now !

    That was quick!
    Got mine Tuesday and had a invisiframe kit put on it by lee before it got used ( very good service from him )
    Swooped round most bits today as so far spec is
    L in flo with Boss
    Pike same as yours
    Flow ex
    Sram gears
    Mavic charge front not sure if to put HR on rear or Ardent that came with it ?
    Bergtec carbon bars 760mm
    Atlas 50mm stem
    Stealth reverb
    Not sure on brakes got black deore as they only had XT in silver and that would look pants . (Might swop them for xt and wait )

    Are you running it 1/10 and if so what front ring did you go with ? My plan when I find some short cranks is 1/10

    Get back to me on your thoughts after 1st ride

    Enjoy

    Ordered on 23 October but 3 weeks after was told they were waiting for boss as some parts were not available for the build of the kirk .
    It was ready to ship on the 1st on dec and still waiting like a inpatient child

    Good luck with delivery on that !

    I am still waiting for mine ( will of been 2 weeks on Monday to get it over here ) :|. I ordered wheels from hope Thursday and they were in the next day so why does it take so long from Spain !!!!

    But should be worth it .

    Julians where abouts are you ? ( iam in the Midlands)
    If it helps I have a large on its way to me this week .
    Got it though sherwood pines bikes just out Side Mansfield

    Oh and I had a demo for 4 days ( boss front and rear ) it was as Doug described ( Fun and fast )

    18″ Evo 2 here with 60mm stem. And I am just about 5.11 ish and feel it’s to small ! ( inside leg of 34 long if that helps )
    Don’t go for the 16″ best get 18″ and put a 50/40mm stem like someone said above .

    Ps if you fancy to try it you are more than welcome in derby area

    Had demo for 4 days it was fast as f$ck down and not to bad up for a 160 mm bike
    Took it to my Local DH play area and it was quicker than my Summun and as stable as well
    I also tried a W 150 which was good .

    I have a rallon on its way !

    Thanks FLB was it on time after you ordered it (around 3/4weeks aim told )

    I got the demo bike from there obrea rep ( midlands area and bike shop is sherwood pines )
    He is a top bloke and very helpful and knows his stuff .

    I also will swop a few parts around from new as it seems the best way of doing it .
    Liked the black&white with yellow wheels but seems a bit under coloured with the black rims ( to me )

    Feckinlovebbq how long you had one and where abouts are you ? Does the pikes feel balanced with the kirk ?

    Doug thank u so much . This is what I have been meaning to ask you and cultdave ( you both have one ) for the past week !
    I had the the boss demo bike and loved it . As you said in your review I to have come to the the same view on my 1st ride ( also the lever was missing so was unable to try it in the climb mode )
    Only thing I was not sure was on the long term use of bike / shock !

    So I have have chosen to go with the kirk rear and pikes up front on the base model ( bike shop very helpful )
    Only problem I have is the colour? Demo was the black & white one but unable to to view the fluro in the flesh ! But from your pics it looks real nice :lol:

    So thanks very much for posting this tonight

    I will get it ordered

    I have had two single hormann in the style just like you fitted to new build instead of one double as one side can be kept shut if wanted and have things will not be seen every time you open it !

    Will try to get it around .

    But that’s not red more Burgundy so fail !

    More- cash
    I two am the same as even slow ones can be fun etc
    only two things wrong with cars is cost and queues !
    Tell me why ( only been to one near cannock chase way ) few years ago !

    The red cars that come from Italy ! :|

    Yes Marcus there is I guess there’s not much room or you all hate cars and poeple or all above

    . Was going to go riding with DVATC but mate has givin me choice of two fuzzers to take so bike can wait as beats driving my old transit connect !

    Jambourgie well at least that has no gap at the bottom from door to cill ! Or should I say top !

    Still waiting for a replacement to be fitted .

    Ps don’t use Munster joinery !

    Thanks very much to KEVIN and CB for PSA on this deal .
    Got mine ( both tool chest and spanners )

    Thanks all for your help in this matter . Seams like DIY is way to go but I know it will back fire on me and tell me to pis£ off ? And end up with nowt !

    Thanks guys foe that info as we’ll .

    Did you have to pay posting at 16.99 ????

Viewing 40 posts - 81 through 120 (of 249 total)