Gets me away from the wife :D

Get a new one 8O

Working away at the moment so waiting to get home and build it up will post pics when built.

One here pal problem? :P

Or just measure the inside and outside diameter and the width or try http://www.mountainbikecomponents.co.uk/for all your bearing needs.

Pinky Ponk for me 8O

Who are them two? :?

I've started to take phytosterol complex from Solar and will have a test in a few months to see if they work I've read good things about them.

Your right molgrips they are my mistake :oops:

Tim at sideways ordered mine top bloke.

Used once never had a problem with them and friendly on the phone.

FINALLY in the country just waiting for :o mine to be delivered now

I use these for my cap head problems as I tend to just keep the extractor in the damaged hex part.
http://cpc.farnell.com/1/1/27285-bolt-remover-4-piece-kit-drill-out-17040-boa.html

I've never snapped a stud extractor yet? 8O

Le Mans style rush of commuters

So the new meaning of rush hour begins! :lol:

Mole grips on out side of head or try a serch for boa extractors.I've used them for getting a disc bolt out, you should be able to put one in the damaged head and drill them out slowly that's if the mole grips cant turn it out or the head is domed.

Who will be the first to sue because a helmet was not supplied ? Just a thought.

I did order mine in May and the first date I was given was the end of June so I hope I'm on the first list. :?

I like the ti one but want adjustability because I'm running a Rohloff.

NEW FLOOR? 8O I had a new floor fitted in the kitchen last week and we could use that straight away!

Will do

I've just picked mine up so I'm interested in this topic just waiting for frame now.

Any shock pump is ok but I like this one
http://www.topeak.com/products/Mini-Pumps/PocketShockDXG

No not frost at the back but at the rear of the chill compartment, but don't move it about too much as it can damage compressor so be careful. Also can you hear the compressor running all the time?

I had a similar problem with a siemens coz the wife over packed it and left the door slightly open which she did several times, so make sure there's plenty of air flow near sensor and the door is closed properly. It there any frost on the rear of the fridge compartment?

Mavic alpine shoes get them for about £67 at ribble cycles.

I got stung in the mouth yesterday :cry:, was thinking of getting a padded one like the good old days but can't find them anywhere?

I take vitamin B6 a month before the summer seems to stop me getting bitten.

I use Neoclarityn Desloratidine but can only get them on perscription and Opticrom Eye Drops are really good and you can get them over the counter. I've suffered with this for 30+ years and have tried the lot but have to say that Desloratidine take the edge off but If the pollen count is high I still suffer :cry:

Try WSOTG.COM :wink:

You could always put down you ride a !7" and 19" at the weekend? 8O

Try

Home

Have your tonsils removed and lose 10kg in a week! :lol:

Just get some brake cleaner. Dare I say it from HALFORDS! :oops:

What's a Halford? :?

Its common sense don't get any copper slip on the pad surface, if you do get some brake cleaner from Halfords.

Hi take the pads out and try some copper slip on the back of the pad this can help sometimes.

I WOULDN'T TIRES EXPENSIVE AND A PAIN TYING TO GET THEM SEALED!

MINES BEEN 196/105 WHEN I WENT FOR MY PRE OP :oops:

I have an Orange p7S for sale, it has sliding drop outs but has the rohloff ones in as I used to run one.
Size is 17" and it's in matt black.