Cool vid 8) !

Not again :roll:

How about this CLICK

ocrider never considered unicycle wheels….mmmmm

No body’s mentioned one of THESE YET?

Try puttiing some heat on the bolts, get them glowing if you can as this usually aids in getting loctited bolts out good luck! :|

I live in Southport and pop in the shop now and then, really friendly and good prices what more can you ask for!

Thought about Topeak rear fender

Fender benders don’t like manitou’s could get mine to fit properly.

68

Do you have any mole grips, if you do wrap a cloth round the body then use the mole grips. HTH

Valve passing,is the lever returning back properly no, crud in the mechanism?

Anyone got one of THESE

Them box bushes need a trim :wink:

Think its going to cost me about £70 all in so I think that’s not bad, big thanks to trout, smudge and teapot!! Just hope I don’t blow my self up! :P

BCT Ive already sent this on an email but I will be using 7.5v 5.2Ah li-ion battery hope this helps with getting the right driver.

BCT you have funds

Trout have sent payment

The battle is over and yes I have come out victorious! Reset it couple of times with the ethernet cable plugged in, might not solve it next time see how we go! Phew…

Think its dead! :evil:

When I use the airport utility, if I reset it comes up but when I try to send change settings to it nothing happens it just sits there blinking yellow while I’m waiting for it to start up. :cry:

Tried factory reset again and still getting amber light flashing every second no green!

Anyone….? :?

Can you get me some tobacco and 10 cases of wine please :wink:
Oh yeah forgot GOOD LUCK!

Think lumicycle supply good brackets but you will need to drill and tap or use a nut to fix it on the box, worth a look. I will send monies tonight but I only need LEDs and lenses got the wife to cut out the platic cover for me at school as they use a laser cutter.
Edit I’ll wait till BCT comes back with prices etc and see what your going to do about delivery.. That driver sound ideal for me as I’m going to run a 5.2Ah li-ion battery.

Standard driver for me please ,BCT is it possible to fit a supressor to cancel out any interferance

It’s probably half way hereby now.

stayhigh couple of things I’ve picked up…copper slip for thermal paste, click for glue and I think the driver is a high/low, if not you could always use a resistor on the other side of the switch(not sure on ohm size though?) HTH

v8 I’d get a kit there only a couple of quid from B&Q last time I looked.

Lazymike are they 2.5mm connectors on the hope stuff, take it to Maplins and try a few plugs?

Hi bit confussed now with the driver board, am I right in thinking that the other connection on the board shouldn’t have a + but a – going to it or are you saying switch the – not the +? :?

Know any doctors? Ask to get it X-rayed or MRI scan but take the ferrous bits off :wink: ,failing that buy a new bike wouldn’t like to be stuck somewhere because my frame had snapped, just a thought.

+1 druidh

Hi Trout could you email a wiring diagram plus any info for charging jack struggling a bit with that Ta
convert try this smudge[/url]

trout what glue is need am right in thinking high temp stuff, also did you use copper slip behind the led’s?

Thats how I’m thinking Lazymike, now need the plug to charge it now.

Looking good on the switch front! 8)

+1 crikey

This is a single pole switch which is better…RS again

So need switch like this 3 toggle switch

Low and high for me, three toggle eh let the search begin.