Like this….. ;)
[/url]
IMGP1136[/url] by lipseal2012[/url], on Flickr

Someone’s got his mojo back with his new bike ;) All depends what you want to spend? Hong Kong phoey ones are cheap and cheerful, you either get a bad one or a good one. Personally I like Exposure, expensive if you buy new, due to the lack of cables. Also helmet light, I think , is a must just to look where you are going.
:)

Not with me sat on it :oops:

I’ve hemailed Joe a couple of times and I’ve always had a reply, if its actually Joe that replied. Really helpful in sorting stuff out even with the older frames. Good stuff!

Not mine but was taken a couple of years ago….

Try these HALBRO[/url] I’m sure they do cycle stuff too. Worth a call.

Shit the bed its good.

Solid or a bit runny?

Yes 8)

I’m hopefully going to have a spin on my new Mukluk this evening.
I certainly don’t need one but I wanted one. HTH

I’m out on mine in the dunes tonight….. :D

This fella…….

Hope its for good :wink:

All that went through my mind all day was ‘Why didn’t I buy one years ago!’ I lived on the Southport coast for over 30 years and have had various bikes I have pushed round the dunes, but the Mukluk glided over the sand with grace. Still buzzing now!! 8)
The best cheapest bike I’ve bought :D
[/url]
Untitled[/url] by lipseal2012[/url], on Flickr

Southport beach in the sun 8)
[/url]
IMGP1146[/url] by lipseal2012[/url], on Flickr

Here’s my cheap Mukluk from todays summer ride….. 8)
[/url]
IMGP1136[/url] by lipseal2012[/url], on Flickr
[/url]
IMGP1135[/url] by lipseal2012[/url], on Flickr
[/url]
IMGP1141[/url] by lipseal2012[/url], on Flickr
[/url]
IMGP1146[/url] by lipseal2012[/url], on Flickr

I did mention not to cut it and I might need to change the stem, glad they listened.

…..and a set of 29er legs

Don’t get an ass saver thing they are less than useless IMHO….but This works a treat.

It’s been instagramed, not seen it the flesh yet. Roll on Saturday!!!!

:lol:

I tried a caravan water pump, fitted a bit of hose and a hose gun. Wasn’t brilliant but sort of worked. Oh and you will need a 10 or 25 lt drum.

Not to mention 7,000,000mm of HS spacers

I’ll let you have the spare one’s when I get it set up :mrgreen:

New bike! enjoy!

Thanks kidder :wink:

It’s still in the shop…it’s still got the reflectors on lol

Just sent it again, put wrong address in :?

Have hemailed

I’m getting a fat bike :P

I’ve used the carbon on one fork worked a treat. That reminds me I need to sell it.

andrewlyness – Member
that is correct, you are trying no to have any air in the chamber

I’ve done the oil change and cycled the fork to get the air out, it just seemed a lot of oil as not that much came out?

Oh and I put 5wt in, instead of the recommended 2.5 :|

Onzadog – Member
How much oil in the other leg?

:lol:

Cheers Nick can’t wait!

I tried this n-1=n+1…it really does work…roll on Saturday!

Just put a deposit on one of these Mukluk 3’s in green, big thanks to Shona at Keep Pedalling for sorting it out. I feel like a fat kid in a sweet shop :mrgreen:

Needs a bleed.

I’m 5’11 and looking to get a Mukluk 3, do I need a large?

I”ve used these and never had a problem TBH

Email Lance Armstrong, he’ll give you some good pointers. :mrgreen:

Take it out have a look at the bottom, you will see the shrader cap remove, fit pump and put 250 psi in it.

So I could run a Rohloff a belt drive and a dynamo hub with one of those 9:ZERO:7 frames! I better get saving.

Now why did you have to mention belt drive!

I’d guess about another £1k?

That’s what I thought, by the time you sort wheel builds, tyres and general faff.

That’s a good price for the pug, but how much extra would it cost to get it up and running?