This…

I do….

Told yeah I’d order a socket if I couldn’t find one, cheer Si keep up the good work you will get my DHX air soon for a full service.

These lot are quite good…CLICK ME

Eyelids work for me…

P.S. don’t know her unfortunately 😥

This should help…

Tunis

😆

That should read thanks, typical iPhone 🙄

Tunis Mr LoCo looks like it will be 10W as I’m a bit of a pudding.

mikewsmith what grade and was it mineral or synthetic oil?

Fox talas and a set of floats, 2009/10 they are not the FIT system. So would synthetic be a better option?

Wouldn’t this be a better solution….

Got the pump off eBay, it’s not that powerful but works well with a soft brush and it’s ok to rinse the bike off…..HERE

I made this total cost £15

But some of the lads in the club have the laser one and are happy with it.

Million thankyou’s, will look in the garage tonight if I can’t find one I will purchase one from yourself.

Mr LoCo I can leave the damper bit in the fork leg and just push it up and down?

Can’t you just measure the hubs and put that data in?

+1 chakaping

Try a bit of loctite.

Hope that’s not spray on mud?!

Who’s won please tell!

there’s good money in it if the footage is useable..

Only if you are HD ready. 😉

Never mind Harry Brown, what about super GRAN

I’m waiting for Mr Trout to sort it.

Can’t be bothered reading all that ^, but the wife(boss) used to have the bottles that had a pot you could put in them with the correct measured amount of powder, we would make up quite a few to last a few days. Boiled the water filled them with water the put the pot in(with powder) lid on and just use as required, but warmed them in microwave for approx 20sec.
MAGIC POWDER THINGS[/url]

Nice cold beer!

Missed out angry wife. 😈

What next air bags!? Off road yeah but that only time I put a lid on is when the wife nags me otherwise I use my high viz hat and that makes me stand out more.

no

you oartner

😯 😆

…. and wearing Lycra 😯

I’ve been looking at getting one of these…HARDTAIL[/url]

Was he on his single speed? 😉

Only when I have a small leak, other than that never?

Are you sure they are 2008 as they have material removed on the uppers, didn’t they do that on the later forks late 2009/ 2010?

I’d go tube or try track pump with core removed on valve, have you used plenty of soapy water?

Our shift pattern rotates also and the plate in the microwave.

Idle thumbs eh 😉

Merlin are cheap for online but miserable buggers in the shop. Unhelpful, clock watching nobody’s who treat every customer as an inconvenience.

+1 and that one with ginger hair is one happy troll. I try not to go into the shop unless it’s something I can take off the shelf and pay for it within 10mins and without uttering a word to anyone.