I think 2nd class signed for has a insurance of £50 and has been quite reliable when I have been sending stuff

I had one from Curtis the same

Still redirected to cloudatt just now.

Off the top of my head I think connects are over but the older vauxhall combo is under from what we had at work.
Unsure about the newer combo

I have a pair of Hutchinson piranha in 34mm I thing at home.
Brand new and unused if they are of any use?
Tubeless ready

I can only see half the page here on android. Requesting desktop view does nothing, is there a way of skiping between forums without going back to the main forum overview everyone?

Make a ladder frame up underneath and bend flexible ply round it?
Just make sure you get the sheet of ply that bends the right way

ETA Oh and there’s a Virgin Terrace and a Salubrious Terrace in St Ives. Both misleadingly named…

I’m sure there is a house called Pokey hole on virgin Street in St Ives…

Are you planning on taking if full width of the garage or freestanding short of the walls?

No emails but disappeared on my Amazon account although it is still shown as a pending transaction on my online banking…

I also bought something to find an email this morning saying it’s not been processed and to buy again from my basket

I ran it for another 2 years after and never had anymore trouble. I have now swapped it for a newer one which probably has the same set up but haven’t looked at it.

I also had the same issue with the gear linkage and had to put one of them clamps on to fix it. Although I did find out after it came off and left me stuck in 1st

I’m liking my Dolan dual at the moment, although I only have 23mm tyres on it

We have dewalt tough system boxes, expensive but we’ll worth the money

I would go clearance all the way through the 60mm and pilot the 70mm with the size of the centre of the threaded section to a full depth that the screw will go into it.

I don’t rate the milenco wheel clamps. We had one on my girlfriends ifor Williams trailer, one day I decided I would move it again after we had been out but didn’t realise it had been put on the back wheel. It just bent and the wheel came straight out and I could drive straight off. Only damage was a bent and mangled wheel clamp and a scrape on the mudgaurd which I replaced for £25 and you would have never had known

Couple of the people I work with are now using dewalt safety trainers and like them

Try your local garage. They got me a new steel wheel to fit my van and it was as cheap as I could get anywhere and not that much more than a scrap yard wanted, and was the correct one for the van

I have just bought my second set of buckler boots. Outlasted all the other sets I have had on site.
If they are comfy for you I would recommend them.

Ordered a pair earlier and it said 320 in stock just looked now and down to 120 in stock so it seems like the stock counter is going down as people order them.

Mines on commercial so is 50

Buy if you can. Much better as you can have the same set up every time and not have to alter the seat height and the stem length will be what you want etc and you can alter the gearing as/when you need to.

I think my vivaro averages 36-38 an an average of short runs and an hours commute

Dewalt tough system boxes here. Waterproof and strong and sets can be had for them to fit onto a trolley for on site.

Had the same trouble after a update and the distance stopped measuring. Ended up back for Garmin to fix it

Fein here too.
Mains all the way have a 110v one and its been excellent

Are the previous owners details on the log book?

My local lidl had some parkside ones with a 25l tank in today for £80

Have you updated the software lately? I had trouble after I updated mine and it had to go back to Garmin to be fixed

Multi cutter is the tool for the job.
Fein ones are on offer at toolstop

Lwb version. I looked at the short wheel base but in a long I can get a second row of seats in with bikes complete behind. And a sheet of 8×4 stands on edge down the side with the seats in if needed for work

vivaro air in takes are nearly just be hind the front corner of the near side bumper.

A standard socket cap bolt head wouldn’t fit in the hole, so £3.50 to have a new pair that fitted without having to grind the heads down, go to anywhere to find any that did was a good deal as I rang my lbs and they got a set and they dropped them off with me so it didn’t cost me any time or travel…

I had the same thing on my dura ace ones. My lbs ordered me a pair from Madison for £3.50

i have the same problem.
updates to 3.0 and now i cant measure distance and it wont record any data…
spoke to garmin and they told me all they could do was send it back and they could sell me a new replacement unit at a discounted rate.

Im there now

some one i know had one brand new and it spent more time at the garage in the first year than they had it so they chopped it in at a year old to get rid of it.

northwave shoes
all the rest is the best i can get at the best price