The very reason I don't ride solo!

I thought this was an invitation to a STW group solo ride..

Me too! :lol:

Thanks for waiting till i'm not there Neil! Manure fans where shocking last night, must've been all the plastics rather than real fans!

Have a look at the Ktronik light here on candle power forums
http://www.candlepowerforums.com/vb/showthread.php?t=227692
Think the new light is on 2nd or 3rd page but if you email or pm Kerry he? will send you a switch for cash! Works with bflex (mom) and looks quite neat, bit like the PCS switch on the lupine lights but a bit smaller!

still got the frame and forks

built up with reba's

Got a D-jab built up as a singlespeed, transfered all the bits off my old wanga frame! :D

I've toyed with the idea of converting my halogen can, but there really isn't much room in there, if i did do it i'd probably have the power socket attached to a lead, same with the switch, and have it remotely operated somewhere on the bars, so it'll free up a bit of space at the back of the can!
Just aquired a hid housing though so gonna stick a 35mm Xpg kit with a bflex in it, should see around 1000 lumens! :-)

I thought this was gonna be a serious thread when it was started! :( Oh well strictly come dancin has just started!

I like mine, much improvement on a mach3, anyone know the difference between the power blades and non power blades??

Vortex, if you turn your lumi hid light with the bflex in down to the low level (350ma) this would give you an indication of what light output you would be getting, obviously one level below max would be 700ma! Think the Q4s put out a little less light than the R2's you have in the Lumi hid housing though!

I've pre ordered a 20mm triple for my dinotte conversion and a 35mm for a lumi Hid can i've aquired! :D

Xpgs in the baby trout would be around 1380 lumens!
Thought the half trout would be a 3 Xpg light??

I thought it was the british broadcasting corporation had taken over there! :(

Newton Abbott to brum will probably be a cross country(arriva) service, bike space is usually good as they removed the buffet car and put the bike space in instead! Arriva trains wales run from birmingham international to Aber, try and get on there if possible, New st will be a mare, and Wolverhampton will be even worse (Wolverhampton is now where most TOC's advise passengers to change because its easier due to there only being 4 platforms apposed to New st's 12

Just put it on, hope it makes the next few hours at work a little more amusing!

If no-one on here can help, i'm sure someone on mtbr might know the answer!
http://forums.mtbr.com/forumdisplay.php?s=72b66fb2f6c38d14084e6ff2a3ae7890&f=165

smudge – Member

I'd like a 1,000 lumen+ helmet light with high/low light power.
A built in battery for an approx 2-3 hr bike ride on max.
The back of the light would have a connector that would allow charging through and more importingly an additional battery could be plugged into it that would just have a long lead from you're camelback.

Oh, also maybe a couple of small or one red led on the back of the light.

Very much like the one trout was going to build before the bastid light came out?? :D

800-1000 floody lumens on the bars, 5-600 spotty lumens on the lid, but nice and light if the battery pack is mounted on to the helmet!
Be nice to have 1 charger for all, and atleast 3 hour runtime for both lights, with high/medium/low settings!

No compressor needed when i did mine, just took the valve cores out, topped up, re inserted the cores and pumped up with the track pump! Job done!

I know of atleast 2 "professional" beggars in Wolverhampton, one guy sits in the subway and has 4 or 5 houses he rents out, another one sells the big issue, he has a few houses too, which IIRC he rents out to other beggars/big issue sellers!

Will do Ifrider!

You will learn to pick better lines, which won't help when you take a full bouncer round the beast at CYB and try and do the same! :(

I've sent him a text this morning about it, was out for beer and curry with him last night, think he's off this week though!

couple of times a week, day trips to wales and weekends to spain are really not a problem, both shift workers though so try and get out when she's at home, er i mean work! :lol:

Why the secrecy? Normally group buys are all out in the open. i.e. someone cuts a deal with a supplier then starts a thread stating xyz available at a discounted rate of £n for all STW members, orders need to be in my dd/mm/yy.

Thats what i was expecting too!

Perhaps there is a special hand shake or something?? :D

Do we have to put stw group buy in the email or something?

:(Ifrider, my m,ate works there too, Chris Toon, sometimes rides in on a blue and white fixie, Check see if he aint had them!!

Got a mate that may be after another 4 or maybe a 2!

Name on log book is your Dad's name so it must be his car! Can't really see the point sending the log book off to have the same name and address put back on it, but an extra owner added, think of the carbon footprint!

Option 2! No brainer!

Shame the Enville ginger beer isn't on!

Adnams Broadside
Black Sheep Ale
Deuchars IPA (my fav)
Wadworth 6x
Oakhams JHB

I've heard the Brewdog Punk IPA is good too but have yet to try it!

Have you got a half link in your SS chain?? Mine made a terrible racket till i removed it!

ended with decent back to pub wish my local riding was like that

I thought it was Neil :o)

Nah not really, good day out, backed off too much first half, gave them a game in the second half, reckon they had some twitchy bum moments at the end! Citeh fans are really really quiet, was like being in church, lucky our lot were vocal!

I feed my dog dry complete stuff but "coat" it in a little tinned dog meat! Works a treat every time!

Our postie never comes before 11am in the week so went out for breakfast with the wife before leaving for Manchester for the footie, low and behold when i got back at 9.30 i had a card waiting in the hallway,he'd been at 9.05! To cap it off it said please leave 4 hours before collecting! PO closes as 1230! :(

New models come with a double washer each side!

My mate uses on on his ti airborne with slot dropouts with no probs!

Couple of serated washers on the bolts on the slidey dropouts helps it grip a little better!

It takes me half hour to get there and it my local ride!