I've had a couple but IIRC i had been in a bidding war, i declined the kind offer both times!

Davegr, I reckon the mr11 pcb "Cutter-XPGMR11T" and cute optic "Cute-3-XP Triple XPE Optic" would be all you need! There are even some mr11 quad pcb's appearing on the cutter site too! :D

Have a look on CT, ride gets posted up there usually! Are you F Mc T on there??

Sorry Chris! :-)

takisawa2 there is usually a ride out on tuesdays around 7.30 from the park gate!

trout – Member

Lumis head will struggle to upgrade as the XRE leds stop at the R2
so they will need a rethink for an upgrade .

Couldn't they just fit the 35mm Xpgs in the Lumi head? Can't see no reason as long as they change the optic too?

Surely the big boys have to factor in time spent developing there lights into the price??

I've got the J-bars and i likes em! If you normally use riser bars you might find you need a different stem to bring the flat bars up a bit!

renton – Member
so how do i go about getting over a 1000 lumen then?? i want a light better than my mates hope visonled thing

You want the triple xpg led then! 35mm if it'll fit, with the SS cute optic (narrow)

Bflex from taskled costs around £24 posted from usa

Markyd yes that is the 35mm triple xpg, you will need to order the cute optic though http://www.cutter.com.au/proddetail.php?prod=cut904
Just put one in a lumi hid housing with the narrow optic and its superb, loads of throw and nice spill too!

This is the page you need to see which ones to order http://www.cutter.com.au/proddetail.php?prod=cut904
click on the box marked xpg on mcpcb and its shows whats what

Sherry, leeroybrown was right, but you needed to go to this link on there
http://www.el34world.com/Misc/bike/BikesLights1.htm

He uses marwi mounts IIRC

Scroll down and you'll see the dx lights

Mud x
Trailraker too draggy on anything other than mud!

YGM x2 steve

Steve i'll take it if you still have it! I'm at work till 6pm though! Email in profile, can access my email from there but its a bit of a Pita to start a mail from there! :oops:

My wife has met him a few times and always said what a nice bloke he was!

I want one for my Hid so also interested if any one has helmet mounted one of those!

Ok i'll let you know if i'm out! Hope your right about the Vile!

Lemme know then! Might be out Wednesday but did tell the missus i'd take her out Doh!

Joys of being a season ticket holder means i get to watch that every other week! If your going on the 24th we've got the Vile at home!

Vf's tested here!

http://www.candlepowerforums.com/vb/showpost.php?p=3115908&postcount=354

IIRC the bflex needs 1.5v headroom

Stoopid Q, but what if you had a £1000 voucher but spent half of it on lights and accessories etc and £500 on a bike, would they only charge you 5% or fair market value of the bike @ £500??

It really seemed to upset him, I think he's tried really hard to do well and put everything into all his performances, not always for the good though! She's just trying to sabotage him IMHO! I hope Zig and Zag get the boot!

Was over chase today, first time out for couple of weeks! :oops:

Working all day tomorrow! :(

Up or down Jacobs Neil??

At work till 6pm so i'll mail you when i get in! :D

Just got home and now i remember the light! :oops:

What diameter are your housings?? Quite fancy the 7up cutter kit!

Hi luminous, can't see pics on my work pc and couldn't remember what set up you had, thought it was triple xpgs! I'm pretty sure my Xpe's were pushing out around 9.6Vf and need some headroom for the bflex to work, as i'm using an 11.1v li-ion pack its quite tight! (have a 14.8v pack too but obviously heavier than the 3 cell pack) Thought you may have measuerd the forward voltage thats all!

Do you know what the Vf of the triple xpg is luminous??

I've got a lumi led, and have ridden with guys with different Hid's and must say out of all of the Hid's the only one which i thought was better than the lumi led was the L&M Arc!

Contracted to work 35hr week but averaged out over 8 weeks, some weeks i work 40hrs and get paid for 35, some weeks i work 24hrs and get paid for 35! If i work atleast 15 mins overtime i get paid the full hour, can be forced to work an emergency hour at the end of my shift, but this is only usually down to sickness and as i work alone most of the time its just for arranging relief etc! If i'm asked to work over at the end of my shift i can also claim for a meal too! No unpaid O/T here, got the bosses by the short and curlies most of the time as most of them can't do my job, and if i go home the trains will stop! :roll:

lol @ samuri

4 18650 batteries and a holder from turboferret?? X2?

DaveGr – Member
How easy/fiddly is converting to LED's using the Lumi can as I'm thinking of doing it? If it's generating more lumens will that generate more heat and if so will the can act sufficiently as a heat sink?

Thread about it here!
http://www.singletrackworld.com/forum/topic/considering-ordering-leds-from-cutter-anybody-else-fancy-splitting-postage

Need the cute optics as listed on the cutter site! Think there are only 2 types available though!
Hope they are tighter than the xpe 20mm carlco optics as the narrow is around 16 degrees!

Yeah go for it, I've got a 35mm triple Xpg board and cute optic for a Lumi Hid housing i aquired, and a 20mm board to upgrade my dinotte on the way from Oz, Bflex dropped through the door from taskled yesterday!

What i've always done is right click the pic, select properties and the image location is in there! copy and paste on here using the [ img] [ /img] and voila!

:lol:Alex in his 661 p-jays

No, but i can see it from my brother in law's bathroom window in Normanby! :-) Looks like a big hill to be honest and not that big an area?? Guisborough or the North Yorks moors look a better bet to me! Might take my bike next time i'm up there though and have a butchers!