the morally right thing to do is

Does not appear the seller has any moral’s

I find Haribos a bit chewy and tend to sit on my stomach, +1 for the Jelly Babies however

nwill1 – Member

Tell me about these trance x’s – I’m starting to think about full suss. I ride a 4x play bike for everythink but do lots of mini DH & trail centers. How are these for all Round leaning towards heavy stuff? Particularly like rob Hughes with the pikes!

As Olly says, awesome bikes.
They also take a 140mm fork very well

MoseyMTB – Member

He means they are all Trance X not the original Trance frames. It was a shorter travel frame that came before the Trance X.
Ah….

Olly – Member

neither none of them are trances!

tsk.

im am however struggling to find a picture of my genuine actual Trance.

Pedantic ****

Olly – Member

neither none of them are trances!

tsk.

Elaborate please

I have just bought this http://www.ebay.co.uk/itm/Formula-R1-RX-ORO-ONE-MEGA-K18-K24-Brake-Bleed-Kit-/170617948887?pt=UK_Spots_Leisure_Cycling_Tools_RepairKits&hash=item27b99f4ad7

As a layman, your’re going to pull it towards you whilst sitting in a tractor/4×4….?? 😯

So you’ve been warned?
Bit harsh

For obvious reasons it has to be dead straight other than that cut away!
Maybe knock up some sort of guide out of timber

Nice bike, really well done pic’s

Coverage starts midnight sat Sky1

DON’T! The cavity is there for a reason. Leave it be.

Pathetic, speak to any expert. You need insulation.
Why is it not possible?
Age of the double glazing? Old stuff is thin compared to modern units.
Ditto to the loft insulation, wants to be 300mm. If it’s less get more and go 90 deg i.e. across the joists
Dry lining could be an answer

Buy the Superstar version, you can change the bits.

🙄

2008 X2, same as mine 🙂

You’ll prob have to go to/contact a Giant shop and see if they do shorter stems yet for the new standard.
Agree Flow, think they have shot themselves in the foot with this one

If its a genuine 2012 model they have adopted a new standard….
http://www.bikeradar.com/mtb/gear/article/giant-2012-mountain-bikes-first-look-31083
So no its not the usual inch and a eighth

I have a mate who works on Lotus cars every day. They are a money pit, join some forums and research very thoroughly.
You will need money to keep it on the road

Reading though the above posts, you want two pieces of batten at about 11″ long

TandemJeremy – Member

Hold a piece of wood across the back of the hole and screw into it each side of the hole then cut a patch and screw that onto the wood. tape the seams and fill it. sorted

This is the way

Cool pic

A lot say they place it in the freezer after cleaned, it this after it has been completely dried or just emptied??

Just rinse it, no need to dry

+1

You have to bed any pads in AFAIK

Cheers

Not seen that, is that official?

Poor thread, he’s a very good actor. End of.

Yep, fill in between the joists and then go on top perpendicularly (if that makes sense)

Anything Formula

You need to put a spacer ABOVE the stem

RIP Marco

Muc Off wet lube, used it last winter in -6

By pie plate i think he means the clear plastic disc behind the cassette
Edit-too slow

Carbon supposedly has flex as one of its qualities and therefore takes out trail buzz but they aren’t flexy to the degree you’d feel it

Sorry when I said silverfish are the new importers I actually meant silverfish are the new importers. Sorry for any confusion :0/

LOL!

Bontrager ACX (what’s the new equivalent btw) genuine 3 season tyre, for the non tyre changers amongst us

+1, need to find out what the equivalent is

They did turn them off, you just change them back on
Via your settings

Your in london?
Evans stock Trek and Ghost

Who was the person on here who went to the Breakspear Clinic?
Searching doesn’t work