considering you complain that it cost to much to repair a set of forks that wern't looked after. i'd say yes.

http://www.sicklines.com/tech/shock_details/

Elbry Sandland – he's an unsung hero of the "freeride" movement here in the UK. he hits up all sorts of sick hucks around gnarly exmoor.

can-uk "kidding" is that whats its called when u fancy under age girls with pink hair?

useful little tool

http://www.kamerasimulator.se/index_eng.php

http://www.dealextreme.com/details.dx/sku.4355

dear airborne10101
hi what is the quality of the bearings you are selling for various frames on ebay? are they skf bearings or any good quality japanese bearings? or are they non branded? what sort of garentee do you offer that these are good quality? where do you source the bearings from?

in response

dear xx

Hey mate, there off the shelf bearings so not the best quality. The are fully pregreased and weather proofed by hand so won,t rust quickly. As for were I source my bearings no one in there right mind would answer that. If you want enduro max bearing through ebay it about £50 because of the fee,s £45 through paypal. hope that helps.

won,t fee,s?

i’m sure its Brechfa

sorry but its not all the same, when i got riding i go either to Glyncorrwg or afan

its like saying Chavannes is in Morzine.

afan hasn’t even got a black run nor was the mash up held there.
Glyncorrwg on the other hand has

fenwicks

change the spring for a heavier one.
or
up the pro pedal
and add some bottom out boost.
this should stop the shock form “wallowing” and feeling like it has 7 or 8 inches of travel when it sounds like you want it to have 2 inches

You’ll have to laquer it or keep it mega clean if you want it to stay shiney as it will oxidise over time with exposure to the air.

laquer wont stick to highly polished frames. as the laquer has no “key” to adhere to. so will flake off.

i polished my old 04 sx frame. its 18 months since i did it. and its still as shiney as the dya i polished it. used a 1/2 horse power polishing wheel i have in my workshop. for a super shiney finish.

this guide is also a great help.
http://www.poleringsguide.se/english/

anymore help feel free to ask

the higher the polish the less maintinence it needs

No, the gearbox was dropped out of the frame when it was stolen.

no the gearbox was never stolen. before the end of the day each bike had its gearbox taken out and kept seperate from the rest.

Great list, none of those are adverts though are they? That’s what the OP wants.

the guy in the office already has Cinema4D? then cinema4D it is. it would be stupid to learn a 3D program when someone in the office is already familliar with using a 3D program and has it to hand.

I think I’ll wait to see an example of your work,

# 10,000 BC (2008)
# The Dark Night
# Love in the Time of Cholera (2007)
# Stardust (2007)
# The Bourne Ultimatum (2007)
# World Trade Center (2006)
# United 93 (2006)
# Batman begins

that enough for you?

have you used anything else other than lightwave?

tool? i am i’m very useful.

come on lets see your lightave work then gnargnar?

i work and have worked for 5 years in the industry including the heart of soho for a few big companies. never have i had to use lightwave.

I think you mean Cinema 4D!

i do! i did! i mean i do! :D

note to self read before posting

not for engineering? and the guy in the office already has Cinema4D? then Rcinema4D it is. it would be stupid to learn a 3D program when someone in the office is already familliar with using a 3D program and has it to hand.

Autodesk Mudbox looks fun though.

is not a 3d modeller its a program to add detials to existing models..

lightwave? modo? don’t be silly those program’s are useless.

and gnargnar do you have any reason to say lightwave and zbrush?

i’d say it totally depends on what the 3D program is going to be used for. VFX or 3D for engineering?

and also what is you’re budject?

this is what you fatties need

http://www.enduroforkseals.com/id64.html

they weight 60grammes

this was brought up a few weeks ago. its just before the energy section at Glyncorrwg

hang on you want a front 150mm? 20mm hub? doesn’t exist sorry.