This is a concern, looking at a bike from an online store which is shown as in stock. But they quote 14-21days for delivery.
I can walk there in 2 days and cycle back in 14 hours according to Google maps..😂

Just got the weight from orange, 13.3kg.
Heavier than all my bikes…

I was curious and checked out the geo on some women’s bikes, having two canyons myself I looked at what they have.
Any reason why a women’s bike 2XS would be a bad choice? Apart from crank length..
Canyons grand canyon wmn has a lower stand over and reach. Comes with 27.5 wheels so I’d just need to replace the frame when he’s to big..

Skankin_giant
Member
With a bit cut of the seat tube you can get the saddle to 720mm and the standover just a bit in front is 670mm (thats on a 401 I think they are pretty similar..)

Thanks..
Just measured his inside leg with shoes on, only 64cm!

Anyone know what’s the weight of the 403 and 405?

Thanks, that’s a shame to big for my eldest.
Can’t see a 24 inch bike lasting that long..

Normally half way along the top tube down to the ground 👍

I have a spectral CF9, brilliant bike. It’s great especially in the twisty sections.

I have a medium and can’t say I find the front high.

There was an issue with cracking in exactly the same spot on the chain stay. Canyon say they contacted everyone who bought a bike effected from the first batch, replacements sent to all apparently.

Mine never cracked but did have some minor damage near a pivot bearing that looked more cosmetic to me. Canyon insisted on sending me a complete replacement bike. This was turned around in 7 days, so can’t complain there.

Join the spectral owners group on facebook, there’s plenty of info on there.

First time I’ve seen it

This on the 2018 spectral, as the downtube now has there Bolt on cable channels this doesn’t give you any space for a bit of slack.

As mentioned above I normally go for the unbolt the lever approach and feed the cable in to remove the post.

My son did both blue loops last year when he was 5 and a half years old.

He loved it and didn’t have any problems.

Thanks god the OP is OK and didn’t have to go to horsepital

Are you trying to suggest that the horse was a gypsy and because of that, it was trying to pinch your bike from right under you?

I just ride my bike, if something’s needs replacing it gets replaced. 😄

Orange £25 plus postage..the bearings don’t appear to be anything special?

£11.38 including postage – enduro bearings

http://www.wychbearings.co.uk/6902-LLB-Enduro.html?gclid=Cj0KCQjw6pLZBRCxARIsALaaY9ZNIRqcuW5SBDTxD2O1y9W8efIMilT88JySb09XWN155t0M74doXKcaAk8xEALw_wcB

You can also get hope bearings listed as 61902 RS for around 4.50 each.

Just reuse the bolts and plastic caps.

Cassette 613g – that’s a level above a boat anchor!

Don’t get me wrong about them being a bit draggy, just depends on the surface your riding on. Just thinking how fast it would be with some smaller less aggressive/XC tyres on. Although that might take away the plush feeling.

I have a 2018 Spectral CF9.0, it’s absolutely awesome. Puts my old now gone Orange 5 to shame.

It’s so nimble and fun in the twisty stuff, great down and up hill.

Extremely easy to get plenty of air, that the first time I did it I nearly went over the bars.

2.6 tyres are fine can be a little draggy up hill, but not as draggy as 2.35 Hans Dampfs IMHO.

Weighs on my scales 13.2kg, tubeless and swapped the bars and stem.

Here she is as Coed y Brenin

How do you know you have the camera pointed in the correct direction/angle without a screen?

That’s a nice looking rear hub..

https://dbikerstore.es/shimano-xtr-177

Spectral 2018 hasn’t changed price since its been on the site, so not sure about canyon putting their prices up 30%

Still decent value money in my opinion and hard to beat the spec for price point

I’ve pre ordered the spectral CF9.0 forecast to be shipped between the 30th -5th of May.

If that gets delayed I’ll be mad at not taking advantage of the 10% off on the jeffsy, which expires on the 30th. Plus the model and size is in stock

I put the pins from my saints in my SS nano’s (not the x model)

I think he took his seatpost for a walk?

Rockshox Pike B1/Revelation Debonair Air Shaft

And

https://www.jejamescycles.com/rockshox-air-shaft-pike-soloair-27-5-160mm-29-140mm-lhe1932.html?gclid=Cj0KCQjwqYfWBRDPARIsABjQRYxmzJTtT6HKh8MvYCdqUdN02ZuF7oy8zW8T5lRXSqkYJR0fn9a9SK0aAuMJEALw_wcB

Assuming your after 27.5

Any idea which day? Tempted to join the fatty club with my dude.

Canyon Torque?

Spinner Air grind 20″ fork

Email I received from the polish distributor:
I have two Spinner models for 20” wheels on stock.
First one is Spinner Grind air 20” – 120 EUR, gloss black available. Second is Spinner 300 air 20” – matt black available – 125 EUR.

Spinner Grind air 20 offers 55 mm travel, air spring, hydraulic lockout, v-brake/disc brakes compatible.

Spinner 300 air 20” offers 80mm travel, PM disc brakes only, hydraulic lockout is also standard.

Prices already include shipping to UK.

Maybe a Garmin would be more suitable?

😁

They had a few spectral ON’s, seemed to be very popular in the demos, so much so that this is the only pic I got..

Yeah the Mercedes World was a nice touch, my boys loved watching the diffing on the skid pan..

Would have gone in Brooklands museum if the nipper wasn’t getting restless in the pushchair, that’s a thing to do another weekend.

A couple of pics of the cars

Will this work on a 2014 pike ?

Basically im finding i keep crashing my bike with nobby nics but never crashed with a hans dampf trailstar. But the hd ts is too slow.

I think you’ve answered your own problem.. Don’t go so fast on the Nobby Nics 😂

Your mate could save half his dosh and buy my well looked after 5..

Join the facebook Canyon Dude group..

https://www.facebook.com/groups/2110028932607475/

look there is a little improvement from the charger 1 to 2

That being said how much improvement is there over a 2018 pike RCT3 Vs a 2014 RCT3? Apart from 20grams and boost.

There’s a canyon UK event on the 24th-25th of March in Weybridge  (Kingston way) over 40 bikes on display, test rides etc

It’s on facebook

https://m.facebook.com/story.php?story_fbid=944139235739578&id=169207803232729&__tn__=%2As%2As-R

If that link don’t work try this one, I’m not a facebook user

https://www.facebook.com/events/2101961756497613/?ti=as

Maybe consider one of these

Crankbrothers Klic HV Pump Review

Hope 148 x 12mm Boost conversion kit for Hope Pro 4 and Pro 2 Evo hubs

Includes rotor spacers, end caps, longer rotor bolts and freehub spacer (not required on all hubs)

Instructions here: https://singletrackworld.com/forum/topic/converting-pro-2-rear-hub-to-boost/