Tubeless.

Try Firth Cycles in Queensbury near Bradford. Ryan one of the techs has had a pair for about a month. Can’t do a link, like a fool I started a windows 10 upgrade :oops: and I’m on my phone.

Had a similar problem with my resin shower tray. Re sealed it a couple of times and it kept cracking/ leaking. Bought some ceramic quadrant infill tiles. Lodsa tile adhesive then grouted in and it’s perfect. Depends on what type your shower tray is, some of the plastic ones are very flimsy.

Imgur, very easy to use

Leisure Lakes used to, not sure if they still do.

No problem for a laser to cut this.

8O Not heard of any of em?

Like that, and it includes System of a Down. Win win :D

Seem to remember from my Five Spot that they are 10mm, so plenty.

Most are PM unless you buy a 15 year old design

Mates 2015 Nomad is IS mount :wink:

Plus, if you strip/wear the PM threads you might as well bin the frame.

Turner have a very simple soloution for this.

You will always need some form of adaptor to accommodate for various disc sizes.
Post mount on my Spicy Team

Stif offer a fitting service for Invisiframe, don’t know if that’s just for bikes they sell. I’m from the same area and went down to see Lee @ Invisiframe for my fitting.Top job, had to hang about for a couple of hours so went to the Trailhead bike shop for a natter and a coffee.

Got a Bell Super2 Mips which has the GpPro mount, love it. Have an Urge Allmountain as well.It has a a flat centre section (ie no ridges) and used a curved stick on GoPro mount which had a helmet light on all last winter,very secure.

gaz, check to see if they are in stock before you send the forks in for service. I didn’t and they were out of stock :oops:

How’s £140 sound? Plus P/p fees. Email in profile

How about an Ei Monarch from a 2014 Spicy Team, it has the 2015 head unit fitted and includes all the relevant bits and bobs.

40 stones 8O 8O 8O

2016 Spicy Team :mrgreen:

Not seen him for a few years, used to see him a couple of times a year and always made me smile.

RIP

Very similar to the OneUp which is out of stock :?
http://77designz.com/product/freesolo-iscg-05

Yeh, Reverb. Crc have em for £1500. Can’t remember where I saw them at the mo.
http://www.chainreactioncycles.com/lapierre-spicy-team-suspension-frame-2014/rp-prod111602

Here’s mine, just swopped tyres over ready for tonights mud fest. No problems with it after I junked the Ei setup, just had a couple bearings to replace. Bit wide in the rear but don’t get much heal rub,just a few black rubber marks from my FiveTens. Good climber with the Db Inline, brilliant descender. Weighs around 29ish in this build. It’s my only bike so gets used for everything. Seen some very cheap frames online

easygirl, it’s push fit :wink:
Was gonna go CK myself as I have had it on my last two bikes, headset and BB without any problems. Decided on the Hope BB 30 screw together jobbie. Not sure if you can stop the creak totally, but take em out and clean them and use a little copperslip on reassembly. Flame away.

Had some on Crests without a problem. Did clean the inside of the tyre with some disc brake cleaner first.

Nice Steve, looking forward to some built up pics :wink:

glasgowdan, you don’t need to heat it or stretch it.

Merlin and Nextdaytyres have them now, depends what size. Just got a 650B Shorty from Merlin, they have been unavailable for a while.

I do with mine. Have three chains that swop between,and take em off for maintainance etc. Still seems pretty secure. Always carry a spare link on a ride though.

Not working for me,

Edit: It is now

Have a look here :arrow:
http://www.trickstuff.de/en/products/clapton_KL.php

Why bother with tape if it’s such a problem :arrow:
http://www.justridingalong.com/veloplugs.html

:oops: Oops Pacestar.

Thought this was the BIKE forum.

Try here :arrow:
http://www.bike24.com/1.php?content=8;navigation=1;product=99495;page=2;menu=1000,2,103,104;mid=6;pgc=0

Nail clippers here too,nothing sharp left to bite you when cleaning.

The bubbling is rot from condensation/ water ingress where the inner and outer skin is joined. The crack shows how weak it is. You can’t get rid of the rust easily and any repair will bubble again. Would leave it alone or as advised get a secondhand bonnet.

Can’t see it being a problem. Cost might be a problem if it’s a low value frame.

8O 8O 8O

Best bet would probably be a demo bike. Sowerby Brothers in Mirfield might help you out or Earnshaws in Huddersfield. Maybe All Terrain in Shipley. Don,t know of anything in Halifax itself.

Evoc, it’s a quality item.

Chased one on my Spicy Team, not totally sure as I changed/ cleaned and re-torqued everything but a little grease between the carbon stem spacers may have done the trick.