Why are you getting trouble with flatting NW?

There will be at least 2 fatbikes at Swinley in the morning,happy days!

Bluto + Nates.

Br710s are lighter than the Br2250s. I thought they were the same but they are not, I have 90mm Nexties. 😀

Re floaters
Use the code PR12DWHEETYRES and get them for £17.59 (today only!!!!).

If it is staying where it is just screw it to the 4 studs.

Just drill a pilot hole, countersink it and whammo!

Sorry crossed wires,I thought it was dry lined not studwork,although if tis is coming off the wall it cant have been fixed to the studs in the first place.

Yes just drill straight through, insert plug in to the batten,start suitable length screw a couple of turns in to the plug,tap the screw/plug combo in with hammer to get plug in to wall then tighten screw up as normal.

Long masonary bit and get some new plugs and screw in there,job done.

If it it as I think then you may aswell bite the bullet and remove the rad.

Pics might help? Can you drill a new fixing or 2 in the back board?

615 +1

Mudhuggers fit fine on a fat bike,just heat them up and widen them with a hair dryer,ala Rocketdog.

Got a Tusker and dont make contact,I use flats and because it was new tried not to get heel rub and settled in to a comfortable position which just feels right now.Its an each to their own really but no one I ride with has ever mentioned it (4 fat bikers). Give it a go .

Scorch+1
http://four4th.co.uk/products/lights/scorch/

Tried to do a whole thread with no reply then went for reassuring. 🙂

I am sure it will be fine.

Fair play mate,either will be good fun let me know which way you go and dont forget that ride! 😀

Any more thoughts Slimjim?

Open all sours- Arkwrights are now licenced

Good work Fadda,play safe!

TEASE!

Its a medium.

Slimjim I am south of Guildford if that is any help?

Slimjim, I have a Tusker and dont generally have any contact, where are you?

Endurofly, well done! Do you have any pics?

Was just thinking that.

Four4ths Scorch job done
http://four4th.co.uk/products/lights/scorch/

Get a local independent RGI to assess it,job done.Without a complete pictorial of the system,how are we to diagnose?Not having a go.

Quite high draw, are they 5amp batteries?

Wrighty, I have 8 batteries in total, all M18,impact driver gave up yesterday after 5 years of almost daily use.It was part of a twin kit and the drill chuck is showing signs of wear so would like a replacement set. I thought someone mentioned that Ton sold tools, but he is on his jollies I think? I was due to go to Toolfair @ Sandown Park yesterday but decided to get a job finished instead,have got really good discount previously,Sods law strikes again!

And that Ladies and Gents is how the construction industry deal with differing views,an inspiration to us all,#proudofyouguys 🙂

Cheers gang!

Ground Control’s on my Tusker, should be enuf! Nate’s seem to be standard go to for winter.

Good looking OOF 20″ in the classifieds, good spec too!

I have a Tusker in raw,love it! Dont know why they arent on the site, maybe call Finlay the rep.

+1 Fat bike

Not got a 5 but have fitted one over/around a 4.6″ Ground Control.

You have made the first move Ashley. 🙂