UBYK have 20% off of everything just orded some pro 4 stans flow boost wheels at a great price

Haven’t tried the 129 but I’ve got one of the 130c’s and after swapping the god awful tyres it came with it is as brilliant going up hill as it is blasting down the other side.GET ONE

go to MC Mills near the post office proper old school ironmongers they will have any thing you want

hi i fitted a full house of oak windows,these were treated in the factory with a micro porous clear coating from spain that looked great and was guaranteed for i think 5 years

I fit windows and doors and have fitted loads of bifolds steer clear of plastic at any size over about 2.5 mts you have to constantly adjust them in a hot summer,ally bifolds are better but furiously expensive and timber ones will require ongoing maintenance.Ive found that some french doors between glass side panels offer a big enough opening for this country and at about 1/3 the price.

Are the rotors the same?Ive had a similar problem when the disk braking surface was smaller than the pad surface and the pads were catching on the rotor ‘spokes’

Talking to the dealer Whyte has already sold out of next years bikes and they are selling like hot cakes so if you want one i’d get one sooner rather than later

You can replace them like for like ,you don’t have to comply with escape regs unless its a new build

Penis museum

Its a 2011 and I think you’re right about the 165×38
cheers

Mmm waits for the clown bike massive to jump in with “if you’d been riding a propper sized bike blah blah blah”

No definitely Xr10 I think they were made only for the spark 10 2011,proberbly re badged 240’s but not sure

Disable it after lap2/5 if you’re at mayhem

Bugger just gone 1×10 on a 32t front or else I’d have had a go might still if I can get my cadence up to 500rpm

Second hand spark is a good option

just built up a spark rc with 120mm forks super light very stiff and tough enough to be hammered down wharncliff last weekend great bike

Will proberbly sleeve the inside and get a longer topcap bolt so i can use the origional star nut

Cheers every one looks like i’ll be getting the tig welder out then.

Talk to team slug he’s pretty good with the bike spanners and local to wakefield

Remove your left crank arm lube everything including the bolts then tighten everything back up as tight as you dare

That not funny….sorry i’ll get my coat

look at the frost river bags at on one,look pretty good

Tried the same thread regarding ledwards but the moderators pulled the thread saying they couldn’t allow people to go seeking revenge after they had been robbed by some scumbag

You can buy a complete stans kit with rim tapes and fluid ,last time I bought one it was about £50 not cheap but worth it for no more punctures

What’s his name/number I may have some old clothes that are a perfect fit for him(6’2 here)

Forgot to add the race’s must only be two laps long so that the rest of my team mates can complete the full course

If its common land you wont find me riding on it I only ride on the posh stuff!

check out rose bikes much cheapness

Quick heads up on one are doing 991 srams @£14.99 ive just bought 2

I must admit that in between changing cassettes I stare at the grooved freehub and think why why why why o why cant hope sort this out then fit a new cassette and forget about it ’till next year

No hood but the endura stealth 2 is a truly great bit of kit,waterproof,loads of pockets and pit and side zips.

Have got truaviv noir on both bikes,not bad price and pretty bomb proof

Spesh phenom,come in different widths also,take some breaking in but are worth the effort

look for teamslug he’s yer man

I’d be checking out the local Audi/pad owners club,bound to be a few of them there

Another vote for the whiteroom went this year hard to fault them

Try rose bikes for xt brakes,rotors from ebay much cheepness

just check the long range forcast and look for the weekend with the shitest weather it’ll be that one

“I used Bonti Mud x 1.8 at mayhem and had no clearance issues at all on my scalpel. So glad i decided against SITS…. “

Mmm they might have clogged up on the third lap!

Why not knock one up from some old forks?V simple to do