Thanks for all your comments and recommendations 😉🚴🏼‍♂️

That’s what I was thinking of.
Any reviews

Edited as 11 speed

Sorry meant to say Tripster AT
Have edited
Still useful though
Thanks

Yes
Am finding that there are not many 650b gravel tyres

Have seen the tanpan
Have you seen one in use

Cheers I’ll take a look.

Have looked at swapping rims but will only save about 350g / rim (Already run tubeless) where as a ICT frame is I think 7lbs and a Ti mukluk for example is 4.5lbs. What weight is a travers for example.
Not built for carbon. Ideally a titanium frame will last forever.

My intitial thoughts would be to try and match geometry of ICT. Perfect size but heavy.

I like the travers but I run Blutos and haven’t seen any builds using them.

I’m running a Lou on the front. Theory is that is similar to a Nate. I’m still running a 4.8 Jim on the back but it’s not great in the mud, but it’s light and rolls fast.

IMO transforms Fatbike into true all rounder,
Ran rigids on OOF now have 120mm blutos on ICT. Tyre pressures are critical Running 7.5 rear and 8.5 front with 4.8 tubeless Lou,s

Ebworth Gloucestershire.

Slam FOD may be on the Sunday but would like to be involved on the actual global fatbike day.
Thinking of FOD on the Saturday unless any other gatherings on.

Based in Worcester. Any rides planned near me.

I use Pendle 4 Wheel support rack. Agree Aiston good if DH or similar bikes just watch nose weight with 4 bike carriers.

Thanks for the tip.

Nixon, That’s pretty much what I was thinking Endura stopping black MTR apparently.

No problems just would like to cut down on straps and wondered if any mounts available

Was using chest mount but use camelback too.

Yes has wheel supports

bgrunes thanks for the email. Pics look great

Now they have been available for a few weeks any pics and specs.

Trout
How do you find Puffin better.
Love the stability of the on one at speed and the general handling. Partly due to the slack head angle. Was thinking a puffin with 120mm forks may be the same numbers.
What sizes are the 2 next to each other,
What travel forks are they on puffin
Sorry for all the questions, looked at a puffin some time ago but went for the cheap option of the on one.
Lovin the fat experience and now plan to sell a couple of bikes and build another. (Daughter wants on one)
Thanks

Candodavid do you know what size foam you used ?

Brought mine as wanted something different and haven’t ridden another bike since.
Speak to Graham at Slam 69 and he can sort you a demo.
http://www.slam69.co.uk/bfat-bikeb-161-c.asp

Planning to drill rims and set up tubeless before I ride it. Will get cranks next week. Then ready to ride.

Bump

Hi again Lester.
Who did you contact at on one.
Thanks for help so far.
Dave

Hi Lester.
Did you order the carbon forks at the same time.
What reason did you give them to return standard steel forks.
How long ago did you order.

I have noticed the lack of head badges.
Looking at building one and was wondering if anyone any head badge ideas.
Thanks

Thanks hishairyness. See you on Sunday.
Definitely the way I want to go.
Having ridden steel Hardtails for years I am keen to explore these in fatbike guise.

After a bit of research I think I have narrowed down to Genisis Caribou or Singular Puffin.
Are they similar geometry
Any other thoughts

Having ridden steel bikes for a number of years an orange P7 and now a Cotic Solaris I like the idea of Caribou or Puffin.
Was wondering if any photos of builds and opinions on either of these bikes/frames.
What would approximate build price be.
Thanks for all comments so far.

lotto – would also be interested to here of experiences of Caribou.
On paper looks great spec.
What are the sizes like. Normally ride medium Solaris

Thanks for all he advice.
How do you transport fat bikes on the car.
Have Pendle wheel support rack which could be modified to fit.

Lummox
Did you get battery and charger from C and B seen.
Thanks

Harry the spider.
Pre emptive.
Will send Torchy a message.

???

Thanks for all the advice. Will weld up extraction tool and have soaked in WD40. Ball joint splitting tool looks like a good idea.
If all else fails will cut through axle and then I can remove taper section in the vice.