I learnt how to say “Hello Monkey” in sign language!

Build your own?http://www.youtube.com/watch?v=H0TBZeCgL0E&feature=player_embedded

You’re missing out, just watching the Tweenies for the second time!

Hi,
I ordered a LED and driver kit.
Been reading through the thread, as far as I can tell I email and pay troutie £20 for the LED kit?
But what about the driver kit?
And finally, do I find instructions somewhere?!
Thanks

Safety car start. Boring.

Yep, have to try and switch over from CBeebies though which may be tricky

martini with a twist. tanqeuray.

has your chain come apart 50% of the time?

We need pics of the missing washers!

you are missing a washer below the caliper and above the tri align conical and convex washers on both bolts.

Thanks – can you show me a pic?

I must always have been missing them then – just swapped over from another bike, haven’t even undone those bolts!

In bed, too many leffe for lunch

Thanks, I might go for it!

Realman – where you get the santa cruz chainstay protector?

If you make the switch can you keep your triple chainset and just put two rings on it? which one do you not use – outer or inner?

Also are regular shifters ok if you adjust mech properly?

Hmm. What bb should I get to replace it? Don’t like the idea of that.

Don’t want to spend a fortune, <£40?

How do you find it and how did you do it? i.e. what crank and cassette ratios?

I’m tempted cos i never really move off the middle ring, and when i do its too big a jump

Watching CBeebies.

Hopefully may build my new (well 2nd hand frame) Superlight after that…

Thanks! Will check em out.

You’re right, will do tomorrow…

Its a bit of a faff and I’m inpatient!

I suspect many are – but rather than figuring out if they are by me dying or now I’d like to know if anyone actually knows!

Upset the Mafia?

Out of interest do you think about kicking the s*it out of the kid yourself?

Obviously you wouldn’t and doing so would make you worse than the kid – but I often think that if anyone hurt my daugher I would go fcking ballistic.

I think the fact that it was an older kid is a big issue for me – the mis-match of it would really wind me up. 15 vs 13 is a massive difference, not that it would have been ok of course if it was another 13 year old – but I would have been more likely to put that down to ‘normal’ playground fights.

That’s what would push me toward the police route.

you dont need a mincer- just chuck in blender – much better a bit chunky anyway imo

Buy chuck steak and mince yourself.

http://www.youtube.com/watch?v=FL7yD-0pqZg

I was thinking about 1×10 – where i ride i rarely come off middle ring.

How would 1×10 work – would get be able to ride all 10 gears? or too steep chain angle?

i’m on a roll

dynamicceramic.com

groutwithapout.com

tileswithsmiles.com

youllbestylinwithmytiling.com

ok
serioustiler.com

tinkertilersoldierspy.com

Ok, so as promised I have made the draw and the lucky winner has been emailed – check your email!

I’ve asked the winner for their permission to announce here before I do as I though it was the right thing to do – I’m sure however they’ll want to brag!

So well done to the winner, and thanks to everyone for the great response -it was really fantastic – nearly 500 responses which the statisticians amongst you will know is a great sample size and gives me a good confidence interval.

If you didn’t complete the survey, you still can, it’s just the draw that is now closed. The survey is here and takes less than 3 mins. http://bikecleaning.questionpro.com

Everything is progressing well, moving from sucessful lab test to tests in the wild this weekend, you can follow progress on my blog here, I’ll also show some aggregated survey results there which are quite interesting: http://dirtwork.posterous.com

And on twitter here: http://twitter.com/DirtWorkUK

Would be great to keep you involved.

Thanks again

Here is a good thread if you are interested in modding your machine with PID, voltage sensor etc – give you much better temperature control. http://coffeegeek.com/forums/espresso/machinemods/427213

And pics http://www.flickr.com/photos/linux-works/3608274583/sizes/z/%5B/url%5D

I’ve never done this but was seriously obsessed with finding the god shot at one point. I’ve moved on….

Great! We have Henrys at work!

Thanks – what size would I need? Is the steerer tube 1 1/8 inches?

Oh any any tips about removing the old crown – other than gently tapping round with hammer and screwdriver?

Nice vid, actually think its the la roux track that makes it, would be pretty boring without?

Great location though, where??