Well done. Glad it worked out well.

Picked mine up after a similar PSA, very nice bars indeed

Night bump.

I’ll be keeping an eye out when I’m out and about.

Excellent work

Yeah I do. I also think it’s related to an upgrade as I can’t see its doing anything else

I’ve got the same issue in the same timeframe. Laptop that was running fine has suddenly started slowing down and the fan runs lots.
I’ve run some clean up software and checked for malware but not solved anything yet.

To be fair a lump hammer would make light work of most doors.

I looked to do mine but didn’t quite get round to it in the end. My research suggested gorilla tape as the way forward.

Double post sorry

None in my experience. Flushing with GT85 just delays the inevitable.

Ramsey Neil – Member
I would go with Krytons suggestion . You do know that the wide teeth go between the outer chain links and the narrow teeth fit between the inner chain links

.

Seriously, this is a joke right? please dont make me pop outside to check mine

Ah that explains why my post about pedals created a link to hargroves cycles. It’s really misleading as it looks like I linked to them, but I didn’t.

Shimano m520 pedals. £16 incl.cleats and last for year’s.

Stunning pic by the way

I wouldn’t buy a dented one

Perfect thanks

That’s a great vid

I always did mine with electrical tape, not hugely neat but cheap enough

Pangdean barn is a great venue but prob a bit too big for 20

Does the manual tell you what torque should be on it? Might indicate whether you just need to be tougher with it. That said, if it’s 3mm it’s unlikely to need a lot of torque.

Have you seen the cannondale trigger thread?? They seem to be going down a storm

The whole story is so ridiculous – I’m guessing there is no motor, mechanical doping is a complete fabrication and the story has been entirely made up by the family and the UCI.

The UCI gain through increase revenues/tv rights/sponsorship.
The family gain with a huge film deal.

:-)

Surely the question should be who saw that from the UCI and didn’t use a motor at the world championships?

Did anyone underperform compared to expectations suggesting they previously a motor but took it off when they knew there would be testing?

I’m tempted to put a smilie here..

Just for the record I think my experience was pre-zyro

http://www.zyro.co.uk/giro/content/giroreplacement

I dropped mine in the garage and it split. I sent the helmet back and told them what I had done and they did replace it under the scheme. You have to pay a few quid for the helmet, its significantly under retail but, if you hunt about enough you can normally get an older colour scheme but same model cheaper elsewhere.

Is the men’s race 2pm UK time?

I’m hoping it’s a one off, but if the technology is available and being used, despite the tests*, at this level then I’m concerned for the sport as whole,
* presumably her and her mechanic thought they wouldn’t get caught?

At least we are now pretty clear that guessing your blood group would be an error.

my ill informed opinion is its not worse messing about for, I’d fess to your insurance company.

I reckon any penalty (extra premium probably) would be significantly less than the potential cost of the works.

Ah that explains it. Thanks

how are you running monkey island on your tablet? I can’t see it to download from the app store or am I missing some wizardry?

As teeto, my understanding is they are switchable between 10 and 11

If some of the threads on here are to be believed, I wouldn’t be surprised if it wasn’t delivered like that :-)

Do yourself a favour and return those airwave tubes, bloody awful. Try inner tube shop instead.

Loads of leads there, thanks all I’ll have a good look

Nice vid. Although if you can ride like that you have no place on this forum

Any use?
http://www.plccenter.co.uk/Brand/UMPCO

Edit. Actually that might not be the best website.

A quick Google suggests you can get genuine ones for about £15. My original one is spot on, perhaps you were just unlucky with yours??

I don’t know this particular model hub but I did something similar with an older XT hub, using a box of different sized spacers and some vernier calipers.

Edit just googled the hub in question, there appears to be a disappointing lack of spacers to play with.

On the chalk or the grass?

I’d still be keen to find out if it’s just this bike or if scott have changed the spec on all these models?

I bet the shop swapped the tyres hoping you wouldn’t notice