But they might try to use them to evade payment for fuel

Was just looking at Lomo bags. Originally made motor cycling bags. Looks good an cheap!

So it’s all worked out perfectly! Met nick of this parish this afternoon and evening managed to shoehorn the Mundo into the back of his car last night in Brighton. Top man! Looks like I wasn’t a moment too soon for the bike! Salt air and living outside don’t do bikes any favours it’s looking a bit sad :(
New tube in front wheel and a good ride up the lane and all working ok :D
New saddle,good cleanup and maybe some citric acid , clean the rust from th stainless spokes!!!
Hopefully if using the bike for work is good, a respray is in order next year.
Thanks again to Nickthegreek what a star

Cheers Lardman! Much appreciated :)

So, payment sent,contact made with Nick who will bring the bike up to within 20miles, fantastic! Just need to meet up and exchange bike for karma points and a malt as a thank you!

All the offers to help out are heartwarming and what what this forum is so good at, we need to remember stuff like this when you think it’s all going to Pot!
Will update progress

@nickthegreek

Have. Emailed you.

Thanks for the generous offer

I don’t think so Scotroutes, they seemed too genuine and helpful. They seemed shocked

Tnt were the £150 quote for the bikeshop in Brighton! That was their price from tnt!!

It’s 20cm too big for cyclesent

Ill ask the seller if he can get it to Reading Ebygomm

Ponyexpress would would awesome! Many STW points would be given out!

I have considered cycling it back, I think it may need 3 days and I can’t take time out of work. It’s all booked in.

Shame Hoodoo, I’m In Nottingham electrochromic would be interesting. Lo tech always good fixable option IMO sometimes.

Navitron kit is pretty good, have fitted a few systems. £5k really is steep!! Where in the country are you?
I should should have put the curtained design design production years ago when I realised it would be a solution to stagnation!

So…..happy to report, just like restaurant tandoori chiicken! Delicious suculent and and light charring child’s play to use. Took no longer than a bbq to heat, could hav cooked for a couple of hours without topping up the charcoal. Saline solution clean tomorro when cool then home naan on the weekend! Can’t wait!
Whats th best host to post photos? Always Forget!

@ charlie: git!

How did you manage that Charlie? Just looked online again an it’s not listed

Tesc top Valley in Nottingham All sold out yesterday :( shame, Ardbeg I one of my favs

It going to néed to be good, Mrs Cannyj was ‘less than’ enthusiastic on seeing it…. apparently we don’t need any more ‘stuff’ . It’s not a though I’ve bought a bike (for myself) recently :D

Soooo, two curing firings carried out, chicken been marinading for 48hrs and a proper cook firing to be done tomorrow, can’t wait!
Seems very well made and complete with all kebab skewars and naan hooks. Plan your make naan over weekend after trea with salt solution after tomorrow’s cook.all good so far!

Geoff,

If you want a Panasonic, I have one that is no longer used. Few years old but works great. Have gone over to handbaking/ sourdough, etc.. all very nerdy!

Drop me a line if interested.

CannyJ

Damn you STW!! Am now an owner of one of theses:

http://www.puritandoors.co.uk/Products/stainless-steel-tandoors/domestic-tandoori-oven-SS1

Looks well made, collected fro warehouse In Trowell, Nottingham.

Will report back. Tandoor chicken currently in marinade

Flour water yeast book. Easiest bread making ever. No kneading, no sour dough mixtures just fantastic crunchy bread. Does take time to make each loaf though. Bout 24hrs including the ferment/poolish/sponge mixture. Uses much less yeast than the automated methods. Our panasonic bread machine just sits there now. Anyone want to buy it? :D,

This ‘professional cowboy’….would use sulphuric acid cleaner from a plumbers merchant. Free advice so you can call the experienced plumbers cowboy for knowing what works :) you’re welcome!

Viessmann now 10year parts and labour warranty for additional £120ish if installed by Viessmann trained installer. Had the 100-30 for 5 years. Just works. Also has weather compensation to save additional 8-12% on gas usage. Simple to fit and service. No special tools required to service like WB….that’s my gripe with WB

@sobriety

I’m based in Burton Joyce drop me an email from my profile. Done work for other forumites in Nottingham if you need recommendations

No. 3 :making sure that the take off point to the pump is on th opposite side to the float valve and the supply for the hot feed to the pump is 25mm above the cold feed so I the cistern runs dry for any reason, you’re not scalded.

https://www.google.co.uk/url?q=https://www.wras.co.uk/downloads/public_area/publications/general/information_note_guidance_for_connecting_storage_cisterns.pdf/&sa=U&ved=0ahUKEwiS18G70fjPAhXhI8AKHY2lD6UQFggOMAE&sig2=xkvkDXAS0uWiiIYIPvdEDA&usg=AFQjCNHAW4es2nXXyODBaw5G-SN4SCum0g

My 13 year old has just passed me in height, he’s 6″3′ and has size 13 feet. His feet have matched his age for a few years now! ‘Acting his age not his shoe size” has been very easy for him! :)
I suspect he has some growing left in him…
PS, anyone got any crampon compatible boots for sale for him? Can’t bring myself to buy new knowing he’ll grow out of them!

Hudson Reed warranty their stuff for five years if I remember correctly. Give them a ring.

Mickmcd, i’d might b interested in that Priv if OP isn’t. Email in profile, cheers

Ho would you have done this with a power tool Ben?

Water off first, obviously! Spanner on hex part of tap under spindle, sometimes helps to tighten first to ease any corrosion then undo and replace washer. Silicone grease on all the threads when you reassemble. If i t continues to drip with a new washer, the tap may need seat resurfacing. Worry about that if it still drips.

Looking like butter wouldn’t melt! Little time. Got the post this morning and ate the flyer from Domino’s! Must have been peckish. Mostly Lab with some poodle in there.

Just so you know, if it’s an unvented cylinder, you need to have a G3 ticket to work on these. May explain why you can’t find a plumber to work on it. Where in the country are you

Thanks Tiger

How did the you manage to do that with the photo tiger?

https://app.box.com/s/kysdkewy9oi1o9vbhlmk45saxevq2yrr

Meet Bonnie! Hope the link works!

Tiger6791, need to sort photobucket or box access, i’ll get on to it!

Well thank you very much! This thread has made me miss my old black Lab so much we had to go out and go and look at some four week old pups. We collect ‘Bonnie’ in four weeks all being well :)

Dog pics have made my day! Thank you stranger :) must be time we got another black lab, bin 4 years since the last one shuffled off to chase rabbits somewhere better.

Bear in mind that the bench seat is a 6 bolt fitting so you will need to source replacement studs to go in the floor and nuts to fix the Base to the floor. The Base is big and heavy, even more so with two people sat on it. If you stop suddenly….

T’was a pleasure! Hope to bump into you someday :) trust the day at the Uni went well.

Email sent Alex