I have a firm spring here if you wish to try, same issue. pm me.

Or just buy a KMC prewaxed chain.

Don’t forget the swarms of bugs too, they are having a great time. Warm and wet yey..

Any joy with the gpx file,

Mavic can be bought through Chicken cycles now.

What shall I make this time, for beer and food transportation?

Any Ground effect merino clothing, must be nigh on 30 years old.

The cable, if it is too tight/short will cut a hole in the frame, as per yeti asr5’s did.

Have a look at the cable under the bottom bracket.

I had a Solaris Max, now have the Bird Zero 29er,  build is better, parts are better.

So obviously go try both, we’re all different.

If you have the super dooper shimano cables they can go fluffy and bung it all up.

Has the shifter broken by the cable in hole?

Is your mate on one, if so, question answered.

It’s knackered,  lob it. Gone past elastic limit.

10 whole miles….

Got to be worth a try, awaiting the report already.

Thanks all, going to go new revelations from alpkit and faff from there, thanks for the advice/ help.

I took a mate out for a first go since a cancer op. Easy, no danger, Got round
with no issues Best ride ever.

Reckon Weeksy has it right

I have some Ultimate pikes, one ride only as I swapped them for Helms, if you are interested….

I found the lifeline one to be shocking when checked against a snap on one, I now have a norbar one. That seems to be good.

Put the old cassette back on. See what happens.

Erm….

I resemble #2

£525 yey

I’m in north Gran Canaria at the moment, it’s fab, went south today and it was horrid. Back up north is quite lovely.
Wish you were all here.
Boobs
XXX

That was my experience. Followed with go home on the Tuesday.

Cephalonia is brilliant but..
Not much old stuff if that is what you want. It all fell down in an earthquake.

Once the smoke has come out, you can’t put it back i again 😉

I bought the m part one and used it against snap on tools versions, I sent it back and bought the norbar one.

Photo of mech?

Surely if a compression issue has been suggested the garage would have done conpression tests?

All my ground effect merino tops and 3/4 shorts, must be late 90’s. I was going to write a mail complaining the zip toggle had fallen off.

Don’t forget to rotate the levers to burp the reservoir. 😉

They are pretty easy assuming it is dust seals and foam rings. Does depend where the leak is…..

Tried a different pc, haven’t got a spare cable. Shout out to people with one near Reading 🙂

Mine was fab. Wish I hadn’t sold it !!

I made a stainless sleeve for my asr 5 to stop the cable sawing though.

I was told, by a very nice man working there it is a netflix show. He also said I was nice coz I listened to him and didnt get the arse 😀. Cut the ride a bit short though.

The VW Group use two wiring looms, later cars iirc have the breakout loom installed. MOTs are supposed to check wiring for tow bars.
My Altea was a grand over 10 years ago. I put them on the roof 😀.