i wouldn’t dismantle them too much if i were you as all the bolts are made of soft aluminium and don’t like being messed with too much. If you follow this simple routine you should only have to do a periodic strip and seal maintain every few months (video HERE)
1 – clean them after every ride with a sponge and soapy water. i use car polish.
2 – don’t blast a hose at the seals because you’re just blasting the dirt into the fork.
3 – dry them with a rag.
4 – use a bit of teflon dry lube to lubricate seal/stanchion interface
5 – pump the fork to lift the dirt out
6 – wipe off the excess.
That’s it. Fox recommend that you take the bike out with the seals lubricated as they work better wet.
every so often turn the bike upside-down for a bit to allow the oil inside to lubricate the foam rings underneath the seals.
Job done.