Forum Replies Created

Viewing 40 posts - 161 through 200 (of 230 total)
  • Interview: Atherton Bikes at Bespoked
  • Bolt
    Full Member

    Yes

    Bolt

    Bolt
    Full Member

    RIP Steve

    Bolt
    Full Member

    As above Ritchey wcs foam ones on all my bikes.

    Bolt

    Bolt
    Full Member

    Total ascent on strava is always less than what is on my bryton somtimes by quite a big margin!

    Bolt

    Bolt
    Full Member

    http://www.paulscycles.co.uk/m1b0s155p5204/CANNONDALE-F29-1-%28FLASH-ALLOY%29-2013

    Alloy is a bargin with 6 months interest free to boot

    Bolt

    Bolt
    Full Member

    Think the front hub cap is a left hand thread (turn clockwise to unscrew)

    Bolt

    Bolt
    Full Member

    Also 6months intrest free at pauls cycles!

    A real bargin as the top alloy 2014 model year retails for £2400!

    Bolt

    Bolt
    Full Member

    Post on the midweek mtb madness facebook page says 23rd feb, details to follow.

    Bolt

    Bolt
    Full Member

    Got an alloy f29 1 (2013) a month or two ago, great bike and good deals at pauls cycles.
    Under 10kg with some bits off my old frame and lighter rear wheel.

    Fork ramped up quite quick so have removed the volume reducer and its a lot better (for my weight anyway)

    Bolt

    Bolt
    Full Member

    Mr blobby,
    Use IPA to put the foam grips on or hairspray is a good second.

    Bolt

    Bolt
    Full Member

    Ciclo montana, been 4 times, last at the end of September can’t fault it.

    Bolt

    Bolt
    Full Member

    4th in vets.

    Another good event and great end to the series!

    Thanks to all involved.

    Bolt

    Bolt
    Full Member

    Rain was bearable but the wind was a nightmare in places.

    Big thanks to the organizers and marshall’s dont think standing out in that was much fun!

    Bolt

    Bolt
    Full Member

    Great grips use them on all my bikes.

    Bolt

    Bolt
    Full Member

    Just back from ValD’sere thought I would nip in and get a spare tube before going up the lift.
    They only stocked maxxis freeride tubes for the princly sum of €19.99!!

    Made do with the puncture repair kit I had.

    Bolt
    Full Member

    In Val D’sire at the moment, worst day for weather over the last week, lifts are shut today but forcast is good for the rest of the week.

    Lifts in Val D’sere and Tignes are free and wirth a trip over.

    Bolt

    Bolt
    Full Member

    What frame is that chunky?

    Bolt

    Bolt
    Full Member

    Ye, I’ll be there, enjoyed the course last year.

    Bolt

    Bolt
    Full Member

    Have repaired quite a few successfully by using the sidewall cut from an old tyre for the patch, stuck with normal tube glue.

    Bolt

    P.s stuck on the inside!

    Bolt
    Full Member

    Fast as loose on that bit!

    Hope you have a speedy recovery.

    Bolt

    Bolt
    Full Member

    You can just drill out the qr ones with a 9mm drill bit.

    Bolt

    Bolt
    Full Member

    Have got a 2.4,, the cheap folding version and not impressed with it at all.
    Just about to remove it as it wont sit straight on the rim and wobbles like the wheel is buckled!

    Bolt

    Bolt
    Full Member

    Limkilde are they carbon rotors?

    Bolt

    Bolt
    Full Member

    Was up there on Tuesday evening a little less windchill would of been welcome but the best ride of the year upto now.
    Stunning views fro the trig point.

    Bolt

    Bolt
    Full Member

    Lezyne HV or Blackburn moutain for me

    Bolt

    Bolt
    Full Member

    Have always clamped my meta between the lower shock mount and seat tube with no problems.

    Bolt

    Bolt
    Full Member

    From the Sip website

    WhinlatterC With regret, we are postponing WMBC to 21st April on the advice of the Police and Emergency Services. Please RT.

    Bolt

    Bolt
    Full Member

    Went up san marino this morning, not great conditions with poor visability and snow/ice on the ground.

    Hope its a swift recovery.

    Bolt

    Bolt
    Full Member

    http://www.chainreactioncycles.com/Models.aspx?ModelID=57923

    Bought one of these recently seems to fill your requirements.

    Doesn’t seem too noisey

    Bolt

    Bolt
    Full Member

    Clamp my meta between the lower shock mount and seat tube, never had any problems with it.
    It will only go in one side though!

    Bolt

    Bolt
    Full Member

    Ye have used it a few times with no problems.

    Also just cut the valve from an old innertube even if it doesn’t have a removable core. Get the tyre seated first then pop a small section of tyre off to pour in the sealent.

    Bolt

    Bolt
    Full Member

    They are the 20 tablet tubes so you get 40 tablets and the bottle.

    Bought a couple over the last two weeks.

    Bolt

    Bolt
    Full Member

    Raceface taperlock on the SS

    Bolt

    Bolt
    Full Member

    How do you see stock levels at crc?

    Bolt
    Full Member

    Got a home made one you can borrow if you want.
    Am in Preston

    Bolt

    Bolt
    Full Member

    Contemplating a gps myself.

    Anyone used the bryton 50e, how do they compare to the garmin 500/800?

    cheers

    Bolt
    Full Member

    Lee quarry this morning!
    Wet and very windy, but always great fun.

    Bolt

    Bolt
    Full Member

    What is the magura warranty, is it two years like the reba?

    Cheers

    Bolt
    Full Member

    Was there sunday morning lots of puddles but always firm underneath.
    Only notibly muddy bits are on the berms and bottom of hully gully.

    Bolt

    P.s if its been raining heavily the stream crossing will be fast flowing too.

    Bolt
    Full Member

    Epic riding, cant fault, believe the pool is heated now aswell!

    Bolt

Viewing 40 posts - 161 through 200 (of 230 total)