No, I got the standard bar clamp one.

Ye mine arrived today! 😀

No glue needed with those, they are just pushed in to plug the hole.

Bolt

http://www.ebay.co.uk/itm/141035220559?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Bolt

Ye, enjoyed it, bit dusty though and a dropped chain cost me about 4 places 🙁

Bolt

P’s thanks to the Marshall etc

Got back from ciclo yesterday, great week again (been 5 times before), dont know how they do it for the money!!

Bolt

I’m 5’9 with 32″ inside and ride a 54 xls.
Wouldn’t like anything longer off road.

Bolt

Ye, it was a tough slog, but a good turnout, hopfully it will become a regular event.

Thanks to all involved.

Bolt

P.s The adhesive is 2 part and needed a special applicator gun.

Have recently re -bonded the threaded BB insert into my carbon frame using loctite 9466.
Probably done 200 miles off road since and it seem to be holding up!

Bolt

The lads that own rock awnings ride with me.

They gave me and my racing partner an ex demo aluminium framed gazebo about four years ago and its still going strong.

Its never leaked and I remember an awful weekend at 10 under the ben where the skip was full of wind broken gazebos after the race, ours was still standing.

You can also get it screen printed for the full on race team look!

Bolt

http://rockawnings.co.uk/

Bolt

As above football or rugby boot studs.

Bolt

http://www.wiggle.co.uk/osprey-talon-6-lumbar-waist-pack/?lang=en&curr=GBP&dest=1&kpid=5360623440&sku=5360623440&ci_src=18615224&ci_sku=5360623440uk&ds_e_ad_type=pla&ds_e_ad_type=pla&utm_source=google&utm_term&utm_campaign=All+Products&utm_medium=base&utm_content=sIUnOBZrE_dt%7cpcrid%7c%7cpkw%7c%7cpmt%7c%7cprd%7c5360623440uk&dest=1&curr=GBP

Got one of these that is a good size quite comfortable.

Bolt

Something like this

Cannondale Cable Stop Inserts KF014

Bolt

Wtb i19 rims running tubless with 35mm continental x kings on mine.

Bolt

Thanks

Bolt

YTD

Rides 173
Dist 5186 km
Elevation. 99,016 m

Bolt

Yes running wtb i19s on mine tubeless

Bolt

http://rockawnings.co.uk/

Cheers Bolt

Was at gisburn first thing this morning and did a full lap.
Bits under the trees were fine.
Fire road and other exposed sections were frozen solid, ridable with care, but will be worse it it freezes hard again tonight.

The roads off the a59 are quite bad too.

Wouldn’t travel from sheffield to it.

Bolt

Thanks Z1ppy will give him a call

Anyone service their own leftys?

Cheers

Use code CLAS12456 for an extra £1.50 0ff aswell!

Cheers

Still some good bits there but will be very boggy at the moment!

Best after an extended dry spell!

Bolt

As above no problems.

Bolt

As above Rock n roll extreme doesn’t attract mud/grit like the oil based lubes.

Bolt

As above I used loctite to bond a hope cup in and also removed the bottom bracket spacer to get a bit more purchace.

Bolt

I’d use it!

Bolt

Ciclo for me roll on the 20th!

Bolt

+1 for the weldtite kit but I only carry the insetion tool and worms.

Bought xtra worms from ebay

http://www.ebay.co.uk/itm/TUBELESS-TYRE-REPAIR-KIT-INSERTS-PLUGS-STRINGS-4-x-10-STRIPS-/130966247693?pt=UK_Cars_Parts_Vehicles_Wheels_tyre_Trims_Trims_ET&hash=item1e7e32590d

Stopped in val dìsere last august with kids.
Lifts are free just put down a deposit for the pass.
You can only ride the marked trails as the rest is national park status.
So its all downhill routes!
I rode one of the enduro trails but it was badly signed and more like a steep landrover access road.
We rode all the blue routes with kids, but the reds are more full on.

Bolt

The timing was an abismal, infact I suspect the timing mat was not working at all.
There was no auible bleep when passing over the mat and there was no running display of positions, just somebody taking numbers as people passed!
There must be mistakes through most of the catagories as the latest version had a glaring mistake in the catagory I was in.

Its a real shame as the event was otherwise great.

Some good deals here

http://www.paulscycles.co.uk/m1b0s155p0/Mountain-Bikes/Front-Suspension-29ers

Bolt

Hi, they seem plenty stiff enough on the 29er even built with dt revs through some pretty rocky stuff this morning,.
Am running tubeless with 26 psi in the front on bontrage xr1 team issue tyres for info.

Should build up even stiffer in 650b.

Bolt

On and on

Built a pair for my 29r lefty, what did you want to know?

Bolt

Bought strips off ebay, think this was the seller

http://www.ebay.co.uk/itm/TUBELESS-TYRE-REPAIR-KIT-INSERTS-PLUGS-STRINGS-4-x-50-STRIPS-/141204899637?pt=UK_Cars_Parts_Vehicles_Wheels_tyre_Trims_Trims_ET&hash=item20e077c735

Bolt

Just built a pair of the hookless xc 29r rims

I worked the ERD out to be 595.5mm which would explain the short spokes when the quoted is 592mm.
calculated spoke lengths seemed spot on.

For info:

The front built with a lefty hub, dt revs and alloy nipples (with rim strip) was 648g
The rear on Oem dt 240s was 800g

1450g total

Should be fine, adjust the b tension screw in to give a bit more clearance when in the 34t.

Bolt

I’m running a sram s1400 crankset with 9 speed shifters cassette and mech with no problems.

Bolt