Thanks for the responses,, that’s sounds good to me G, have sent you a PM

why would 27.5 put you off?

How do you import the files in to edit then on the Garmin Virb software, do I import front and back?

under £50 ideally

I think a Iphone 7 will do the trick, does anyone one have one going cheap??

I really can’t understand why it would have air preload on the left leg and then no valve

Had a look under both top caps and there is nothing I think, nothing that a Schrader would for or even close, all there was was a tiny ball bearing and a spring in the caps, can’t see anything else there,, also there RC3 not RCV

IV managed to get hold of a rear M775 XT brake for a tenner, I’m halfway there (hopefully the guy I bought it off wasn’t as mechanically minded as me), just need to get a front cheap brake now – if I can’t get it I’m going to try the one I put the wrong fluid in and fingers crossed

Would only need something cheap as there for my downhill rig, the brakes that IV bust we XT Servo Wave 2008’s

Anyone selling a brake set :),, got now mineral oil at home so there busted

Not having much luck at the minute, threaded my crank arm the other day :(

No luck so far, last try otherwise gonna have to buy new :( :( need em by wednesday

Great thanks

It still threads in fine but when it gets to the last bit just spins and wobbles in the hole, I’m guessing there’s no way back with it

Lol be cheaper

Brilliant, sent you a PM

Can only find up to 125mm in Brand X, had the contact switch before and wasn’t a massive fan – had a fair few problems with it

I’ve just had a quick look and the chainring seems on good. Is the nut behind the crank arms?

Yep that’s done the trick, manual found :)

IL take a look, IV been advised the maguras are not the best – however I can get them pretty cheap

If tapered probably guna hold out for some rebas

It is a Bizango, I thought it was a 1 1/8 straight steerer, IL check

I can’t find epixon with a 15mm axle, do they do them??

Yeh we use the kill cord no issue there, bikebouy can you advise where it explains about the third party please, I’m trying to find it but no luck

Thanks for the link, couldn’t find anything on there relating to insurance tho, unless I’m looking at the wrong place?

Great advice! Any recommendations on where to get the third party insurance from – IV emailed towergate

6ft 2 :)

Iv measured again and the only difference now is the stem length,, the headtube is about 15cm on the Capra and 12cm on the Bizango however I have quite a few spacers on the bizango which gets it to the same level as the Capra. the Stem on the Capra is a 50mm and on the Bizango an 80mm

which length should I be measuring, Top tube I presume? Just measured it and they are both 60cm from middle on Seat tube to middle of TT, so frames are the same. However I have a longer reach stem on the Bizango which puts it at 68cm whereas the Capra is 64cm, would a shorter stem help on the Bizango or worth a try?

Shropshire

5ft 10, 31 inch leg

Thanks, after something a bit newer closer to the 8.5k budget ideally

That’s great, thanks I have dropped you a PM

Going to BPW first so won’t have a great deal of time and need to get back early the following day so need to stay close

Fab will do

Or if anyone can tell me where to get the right service kit for this?

It’s a 2014 model

Couldn’t get one at a great price, managed to get a cnoc 16

He is definitely 16inch at the moment 47-48cm, I like the belter bikes but v.expensive

Got one