Choclate and hazel nut spread works well

The BHF ones are good

Or just rftm

http://techdocs.shimano.com/media/techdocs/content/cycle/SI/Deore-XT/SI_1J10A_002/SI-1J10A-002-ENG_v1_m56577569830680226.pdf

looked at doing this a few years ago. Some places run a 4 year grad course however was still really hard to get in. wanted to see loads of voluenteer type work. A number use the GAMSAT tests

I think there is a KMC reusable one. The Sram powelock ones are single use for 10 speed

Had to do my Trance X bearings after 3 hard years riding

Had to do my Trance X bearing after 3 hard years riding

Dremel it out

Still use my ME super I got for my GCSE back in 1988

Well that volume of fuel in a container not designed for it is asking for trouble i recon

Yes only had it in the riverford box but it is fractalastic

For the Elite fanboys I can strongly recomend oolite

http://www.oolite.org/

All you could ever want to know here

http://bbs.scoobynet.com/forum.php

you are turning the right way?

on my trance was convinced the creaking was either the seat clamp or the saddle rails. It would give a really loud crack now and again. It turned out to be the bearing between the rocker arm and seat tube. Its a real pain to get out as well.

Try taking the shock off and checking the movement of the rear end

good vid on youtube. Flicking the leaver as you push the fluid through seems to help get the air oour. Oh and watch the screw in the leaver can strip the thread quite easily

And I take it you have seen

http://www.oolite.org/

Because Methanol and Propan-2-ol are not very good for you

BF3 and Skyrim for me

Ardent for me but I am also running a semi slick on the back

yes normally these places povide boots and crampons as the fit between the two is very impotant

http://www.wiggle.co.uk/lifeline-cassette-lockring-removal-tool/

Works well on normal Pro2s

better start saving for the insurance now as well

Honda Civic diesel. Currnetly averaging 62 MPG and can easilly get two bikes in with back seat down

So Tempur one for me. It took me a couple of weeks to get used to it but now its great. Can be a bit on the hot side so I use Coolmax sheets which help loads.

My wife grew up in Houston and having been there numerous times. I can tell you that have done all there is to do downtown. Basically eating or shopping and that about it. Oh yes enjoy the heat and humidity this time of year.

I use this with a few Park tools as I when I need them

http://www.wiggle.co.uk/lifeline-workshop-tool-kit/

I know someone who got stung for the duty as he could not produce a valid uk recipt for it

Some new Xt trial pedals if they ever turn up. Expected in stock date has just gone back by a month on CRC :-(

depends if you have gotten air in the lines or blocked the filter

The Harveys map is very good

Had an office xmas party at the The Heathrow Hilton at ternmial 4. Remember coming around just as my room door shut behind me. I was stood in the cooridor in just my pants at 3 in the morning. Had to go down to reception to ge them tto let me back in. This is bad enough but there was 20 plus KLM cabin crew down there waiting to check in.

rebound

There used to be boat trips around portsmouth harbour from the dockyard. Also HMS Belfast in London

Can you not set set the limit screw to stop in moving down to the lower unsed position?

http://www.actionsports.de/gb/Components/Groupsets:::7_113.html

Have the dimiensions shanged between the old pro2 and the new evo version?

He just makes it look soooo easy

The roughguide route is the one for this years BHF off road L2B