Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Manitou have made the FS again. No really.
  • aaronrk
    Free Member

    Hi all

    Thanks for the replies, really appreciate them all

    Think that the dh bike will be the one I take then by the sounds of it!

    aaronrk
    Free Member

    I should’ve mentioned that I thought it was the crush washer so I performed a lower leg service

    It’s the same if not worse now there’s more oil in it..

    Thanks for the suggestion though

    aaronrk
    Free Member

    Thanks all for your help. The Funn stem has worked for me fortunately. Just enough tube to get a nice camp onto it so should be all good to go!

    aaronrk
    Free Member

    The low stack stem should come today so I’ll see how that is when fitted. Has intone had just a steerer tube replaced on fox forks? Most companies advise against it it seems but places like the above offer it

    aaronrk
    Free Member

    Thanks Bruneep, I’ll get in touch with them, their Instagram looks good. I wasn’t aware that you could change just the steerer tube alone.

    To the spacer comment, there are no spacers fitted on the head set unfortunately

    aaronrk
    Free Member

    Yeah the husselfelt is a 40mm stack height, the one I’ve orfered is a 30 or 32mm so I should be alright

    Any idea on the cost of a new csu?

    aaronrk
    Free Member

    Thanks for all the replies, opted for a low stack stem in the end. I’ll see how it goes with this fitted.

    If not I’ll have to look at a replacement steerer tube I think

Viewing 7 posts - 1 through 7 (of 7 total)