Forum menu
2x10 Raceface Ride cranks with 36/22 chainrings. Can’t seem to find replacements anywhere. (The originals have worn out.)
I want to keep the cranks as they’ve been shortened to 165mm, and have no interest in going 1x10.
Any ideas?
Looks like standard 4 arm 104/64mm bcd so any chainrings that match that should fit.
Ta - I can’t seem to find any though!
Superstar have teh 104bcd rings, round or oval
Loads of places have these - completely standard rings.
https://www.chainreactioncycles.com/chainrings?f=2258,4294963506
Absolute black?
SJS cycles is a good place to look for any size of chainring ever made.
Ta - SJS is a good shout. Virtually all the others are narrow/wide as far as I can tell.
https://www.chainreactioncycles.com/mobile/chainrings?f=2258,4294963506,4294962987&_requestid=1802844
You can filter the CRC ones for doubles, not many in there but its also one any lbs would either have or get for you really easily
You can filter the CRC ones for doubles, not many in there
Only one! and I don't think that it would fit because the granny ring bolts to the outer ring, rather than the spider.
I thought I would be falling over these wherever I looked, but have been really surprised how difficult it seems to track down 2X chainrings. I've ordered a couple of Shimano ones from SJS, which I hope will fit.
Thanks all 🙂
I may have some in the garage from when I went 1x..... I'll look tonight...
I’ll look tonight…
Thanks - I'm hopefully sorted, but if they do turn up...
Just for the record, the larger Shimano ring doesn’t fit on the Raceface spider - the inner diameter of the lugs is ~2mm too small. Have bodged it on by filling some off the lugs. Hopefully these ones will last more than 1500 miles if I keep a better eye on the chain!