Any help appreciated?
I can connect an old eTrex (recent firmware upgrade/USB to serial adapter) to Tracklogs v3.14.10 but when I transfer a tracklog file (the TransCambrian routes - day one is 234 trackpoints) the route appears to get truncated.
I've emptied the memory on the eTrex so I don't think it's full and preventing further upload.. seems to get all the waypoints but not the whole track and I want to get all three days (separate tracks in there).
Any inspiration/experience with similar? Any ideas?
Cheers, Mark
What model Etrex is it? Some will not accept over 100 trackpoints, I could be completely wrong here - perhaps waypoints?
E-mail Tracklogs direct, I have always found them very helpful.
Cheers - I'll try that but even with an old eTrex (plain old eTrex from sea kayaking days) it should be able to hold 100 waypoints and 1000 trackpoints (unless I have missed something - likely!) so even all three days add up to ~950 trackpoints and 63 waypoints).
Will email them and see if they can offer a solution too.
Ta, Mark
