Forum menu
Snapped the bolt on...
 

[Closed] Snapped the bolt on the botom of my 36 RC2 forks

Posts: 0
Free Member
Topic starter
 

After doing a lower leg service when tightening the bolt which holds the lowers on I managed to snap the threaded section, it's the bit that pops through the lowers. Can't remember wheter it's the spring or damper side. the forks are the 2009 talas versions.

Is there an easy (read cheap) fix?


 
Posted : 06/08/2013 12:40 pm
Posts: 1131
Full Member
 

I guess no! Thats the bottom of the actual part of the fork that does anything, might have to replace the whole cartridge unit


 
Posted : 06/08/2013 12:43 pm
 LoCo
Posts: 0
Free Member
 

It'll be the base valve assm on the damper side (not sure these are availble or if I have spares as cart. now obsolete)
Talas side it'll be a new talas lower assm.


 
Posted : 06/08/2013 12:50 pm