[Closed] N+1 options - titanium or rourke 853

853. 😕

Or that stainless grade, 953 ?
Lovely.

Rourke.

Rourke you say, any excuse to post mine.
[url= https://c2.staticflickr.com/4/3813/11796369825_8d11c32f26_k.jpg [/img][/url][url= https://flic.kr/p/iYptLD ]P1070226.jpg" target="_blank">https://c2.staticflickr.com/4/3813/11796369825_8d11c32f26_k.jpg [/img][/url][url= https://flic.kr/p/iYptLD ]P1070226.jpg"/> [/url] by [url= https://www.flickr.com/photos/rjohnson76/ ]Rob Johnson[/url], on Flickr
[url= https://c2.staticflickr.com/4/3774/11796378545_a075493f82_k.jpg [/img][/url][url= https://flic.kr/p/iYpwmZ ]P1070234.jpg" target="_blank">https://c2.staticflickr.com/4/3774/11796378545_a075493f82_k.jpg [/img][/url][url= https://flic.kr/p/iYpwmZ ]P1070234.jpg"/> [/url] by [url= https://www.flickr.com/photos/rjohnson76/ ]Rob Johnson[/url], on Flickr

Whether you go for 853 or 953 the experience of getting a Rourke is a good one. I arrived at the shop and Brian was outside he helped me take my current bike upstairs and hang around most for the next few hours whilst I was measured up and preferences taken. Gareth who does the fitting is great too, didn't get to meet Jason.
With a Rourke it will be custom built and painted to your requirements, mine still feel special after 3 years, I know if it was off the peg I'd be looking for something else by now.

Lush....

I'd buy a longer stem. One size down is no big deal.

Then I'd buy another bike as well. Fixed titanium for me.

Ooooo, that Rourke is lovely.

I'd get a Rourke. It will always feel special. As said above: buying it is an experience in itself.

My Rourke

[URL= http://i46.photobucket.com/albums/f144/kingcozmo/cycles/IMG_0222_zpsc5a23dfa.jp g" target="_blank">http://i46.photobucket.com/albums/f144/kingcozmo/cycles/IMG_0222_zpsc5a23dfa.jp g"/> [/IMG][/URL]

The financially sensible option would indeed be a longer stem. However, after looking at those beauties sensible just went out of the window and mr rourke will most likely be getting a call in the new year. I love the bare metal thing of 953 but its a bit pricey and concerned it will be a little stiff for the 'comfort' ride im after. Lovely bikes 😯

I Would go custom 853 over off the peg ti.
Worth it to make sure it fits you properly, a major consideration at the sort of price point you are thinking of.
Thats just my 2P, ymmv etc

Whilst you're window shopping (and you mentioned discs) have you seen the Enigma Evoke bundle offer? Upgraded frame finish, Enve fork, post bar and stem for £2k.

I started a similar thread a while back and am still shopping.
Also...
Shand?
Mason?
Bowman?

Rourke isn't making 953 any more, I believe. Painted 953 with shiny highlights would be a thing of beauty.

Lovely looking bikes.

Am I the only one who finds the Ultegra chainring one of the vilest designs ever created though?

Never get bored of seeing cheers drives Rourke. A thing of beauty. I'd go for one of them for sure.

For Ti there is also Burls.

Does it have to be Rourke? Saffron frameworks had some nice bikes as well.

I'd still love a Ricky Feather creation...

Rourke still do 953 according to their website, its not massively more than 853 either. Having said that they I don't think that can do fancy finishes like mirror polished section like Enigma or others can.
I chose 953 as the tube sections are Lee's that ti and I like that aesthetic, I also like to be different.

Does it have to be Rourke?

[img] [/img]

But don't you dare steal my place in the queue! 😉

Enigma - I know a lot of people who ended up with Ti and would not consider anything else now. If my Planet X Ti Pro Road ever dies, it will be replaced with an Enigma frame for sure.

I know a lot of people who ended up with Ti and would not consider anything else now

Horses for courses innit. I've ridden lots of good Ti frames and plenty of good steel ones. There's an obvious weight advantage with Ti, but I definitely prefer the ride feel of good steel vs Ti myself. Then there's the cost to consider too, where a decent custom built steel frame is likely to start around £1k and custom Ti probably closer to £2k. Even if I had the money though I prefer the ride of steel.

If I was going 953 it would be with Hartley cycles. Works of art!

Thanks for all the great comments, i must admit i love the look of a bare metal frames and that alone draws me towards titanium. However, from whats been said i would imagine a custom built rourke frame would be both a delight to ride and presents good value. Im a 70s kid so the old school feel is also a draw. I think i might be sold. Are there cost implications on colour schemes and designs?

Having had the pleasure of being shown around the bar area upstairs by Brian Rourke himself, if I could afford it I'd be there.

There is one disc frame that i keep coming back to and wondering if i really do need both kidneys and it's this Donhou, just love the paint on it.

http://road.cc/content/news/130322-donhou-bicycles-signature-steel-dss1-disc-equipped-frameset-launched

[img][url= https://c2.staticflickr.com/6/5535/30715994313_935b9e928a_b.jp g" target="_blank">https://c2.staticflickr.com/6/5535/30715994313_935b9e928a_b.jp g"/> [/img][/url][url= https://flic.kr/p/NNguYR ]Donhou Bicycles Signature Steel DSS1 1[/url] by [url= https://www.flickr.com/photos/49281217@N02/ ]Scud75[/url], on Flickr[/img]

[img] https://flic.kr/p/NKtxaE ][img] https://c5.staticflickr.com/1/504/30684393524_556e30984a.jp g" target="_blank">https://flic.kr/p/NKtxaE ][img] https://c5.staticflickr.com/1/504/30684393524_556e30984a.jp g"/> [/img][/url][url= https://flic.kr/p/NKtxaE ]Donhou Signature Steel - down tube 2[/url] by [url= https://www.flickr.com/photos/49281217@N02/ ]Scud75[/url], on Flickr[/img]

Are there cost implications on colour schemes and designs?

Thanks for the info cheers_drive, thats good with me, had a similar design to yours in mind but with grey paint and some red/white/blue accents. Better start selling bikes to make room and be financially sensible (or not 😉 ). Will try and pop into Rourke on my travels over the next few weeks to have a look.

Seen two Donhou in the flesh, and they are gorgeous.

I think there's a DS2 gravel bike as well now, if you have any organs left to sell

tripster atr - lovely all round ride

tripster atr - lovely all round ride

'til it cracks near the headtube just outside the derisory warranty. I know there's a lot of love on here for tripsters so just offering a counterpoint, and why I ruled Kinesis Titanium out of my similar search.

Its OK, his PCL snapped before his head tube did.....

tripster atr - lovely all round ride

moorsey72 - i must admit i love the look of a bare metal frames

Could get something chrome plated or there are some good chrome effect powder coats around now.

I pondered the self same question recently and went off the peg Ti (Enigma Etape). Shouldagotta Rourke. I know it goes against the grain not recommending the same route but the Ti just doesn't feel 'special' enough for me. I've learned my lesson, springy custom 853 is the way to go...

thanks Cash, nice to have friends with faith in me

really, really, REALLY wanted a Rourke, but opted for the Mason Definition
in the end .... haven't been disappointed in the year or so all weather, all
terrain it's been on, at or over 🙂

Those Rourkes pictures are gorgeous!

Here's my Rourke——and it's currently for sale! (sorry for the hijack but as this seems to be attracting plenty of Rourke fans!!!!)

It's built in Deda SAT14 tubing, so not as high end as some above, but still a Rourke and still lovely!

Spec is a bit different now (saddle, seat post, bars and stem are all now improvements on this but I can provide spec details if anyone is interested)

[img] [/img]

Just thought i would update the thread. Thanks for advice and thoughts, was a great help in making a decision. Got fitted for an 853 rourke, was indeed a great experience. My frame is due start of August 😀 gone for titanium grey and cream with world champion stripe details. Gathering components as we speak, so far got chris king headset, trp long reach brakes, silver athena groupo with carbon cx chainset. Counting the days.......

And the longer stem? 😕

Contemplating a 953 Rourke to replace the paddy wagon frame. A nicer steel fixed road bike with Enve bits. Or a disc wheel set and TT frame. Too many choices!

I even sorted the longer stem scenario, my other half wanted that bike so everyones a winner 😉

I cant recommend the chaps at Rourke enough, superb knowledge and made to feel very welcome, nothing was too much trouble. The whole thing is an experience and so much more than just buying another bike.

[img] http://https://www.flickr.com/gp/152456540@N07/339y1Y [/img]

Behold

The new camouflage paint scheme?

Grrrrr, still can’t add images 😳
Put on Flickr, copied url and added to post using IMG.

Why oh why??

[img] [/img]

moorsey have a look at https://help.yahoo.com/kb/SLN15714.html