Forum menu
Is it worth going w...
 

[Closed] Is it worth going wider than 710mm

 SOAP
Free Member
Joined: 17 years ago
Posts: 0
Topic starter   [#3354781]

Running raceface diabolus 1.5 risers at the mo at 710mm and thinking of going wider but not sure if there are any other bars with 1.5 rise.



   
Free Member
Joined: 15 years ago
Posts: 0
 

Sunline, Renthal and Nukeproof all do wide (745+) bars in 38mm (1.5") rise.

Whether it's worth it is all down to personal preference. I'm broad shouldered and currently running 745's but contemplating chopping 1/2" off each end as I think they are a little too wide as they are.



   
Free Member
Joined: 17 years ago
Posts: 4
 

I had settled on 710 as being ideal because I'd used it on other bikes. I duly set up a 325.5 build using 710 bars, but then I discovered the bike was doing my knees in. I worked out it was the seat tube angle that was doing it, so I had to move the seat foreward to save my knees. It achieved my aim but then the cockpit felt cramped and I had a 100mm stem already and didn't fancy going any longer so I moved to a 740 bar. Seems to work better and it feels better.

No set rules might be the rule.