Forum menu
Hi, i've got DT Swiss hubs (untouched for about 2 years) i've decided to have look at them/clean/regrease etc furstly is this wise?
secondly if i do there's a plastic seal on the axl, not a rubber one. can i just prise this off? It;s a very snugg fit so i'm reluctant to just apply brute force!!
is there anyone out there who could help or at least direct to some help please?
cheers
[url= http://www.dtswiss.com/Service/Product-Documents.aspx ]DT Swiss product manuals[/url]
Yeah, i thought it'd be pretty straight forward but it's an old pair of cerit hubs (only from 2007)...but i can't find anything on that link mate....Anymore for anymore? 🙂
...but i can't find anything on that link mate...
It's there under 'Old Documents':
[url= http://www.dtswiss.com/Resources/2009/OldDocuments/MAN_hubs_Onyx_Cerit_OEM_370_2007_20070404.aspx ]http://www.dtswiss.com/Resources/2009/OldDocuments/MAN_hubs_Onyx_Cerit_OEM_370_2007_20070404.aspx[/url]
O.k brill, i've stripped cleaned and regreased (that link was really helpful, cheers!):)
i've put the hub back together again, but i've got no noise at all when the wheel is "freewheeling" not a murmour! Is this right? When i was putting it back together i followed the diagrams to the letter and there seems no problems with the fit of the hub.
Have i done something wrong here or are DT Swiss generally quiet?
?
You may have put too much grease in; DT Swiss hubs can be sensitive to type and amount of grease - but if the freewheel is working and they are engaging then I guess you're ok!
Serviced my ex1750's recently - was taken back by how quiet they were afterwards (no problems since)