Forum menu
Crack or Scratch?
 

[Closed] Crack or Scratch?

Posts: 0
Free Member
Topic starter
 
[#2726951]

Following on from a previous thread, where the concensus was this was a crack:
[IMG] [/IMG]

I've now dropped the forks out and it looks like a deep scratch to me, thoughts?
[IMG] [/IMG]
[IMG] [/IMG]
[IMG] [/IMG]
[IMG] [/IMG]

On the back of my carbon forks there is also what appears to be a deep scratch, would have to be at a right angle to line up with the headtube (I assume these are fine):
[IMG] [/IMG]
[IMG] [/IMG]


 
Posted : 07/05/2011 3:50 pm
Posts: 0
Free Member
 

Scratch.


 
Posted : 07/05/2011 3:53 pm
Posts: 0
Free Member
 

+1 Scratch.


 
Posted : 07/05/2011 4:00 pm
Posts: 0
Free Member
Topic starter
 

Sweet, should I be worried about the forks?


 
Posted : 07/05/2011 4:02 pm
Posts: 0
Free Member
 

how do you manage to sctratch it there? plus corners are a weak point, and it starts on the corner.

im going with crack


 
Posted : 07/05/2011 4:03 pm
Posts: 0
Free Member
Topic starter
 

Not sure, could of come from the bike rack at work?


 
Posted : 07/05/2011 4:04 pm
Posts: 0
Free Member
 

Been in the car?


 
Posted : 07/05/2011 4:08 pm
 CHB
Posts: 3234
Full Member
 

scratch, or crack on the lacquer. keep on riding.


 
Posted : 07/05/2011 4:11 pm
 flow
Posts: 0
Free Member
 

Scratch


 
Posted : 07/05/2011 4:14 pm
Posts: 2061
Full Member
 

sand the lacquer back to make sure. does look like a scratch, tbh, but if it's a crack it's a big one!


 
Posted : 07/05/2011 4:15 pm
Posts: 0
Free Member
Topic starter
 

Thanks for all the replies, its back together now and I'll be riding it back to work on Monday.

I will keep an eye on it and mark the end of the scratch with a marker to see if it grows.


 
Posted : 07/05/2011 4:36 pm
Posts: 39735
Free Member
 

float - there is a mark on the forks AND the frame - how do you suggest that two cracks on two separate componants would crack in a similar place like that ?

scratch


 
Posted : 07/05/2011 4:45 pm
Posts: 2
Free Member
 

Scratch


 
Posted : 07/05/2011 4:47 pm