Forum menu
Ok- wheel fitted and wiggled there is alot of play from the axle area.
Help. I've tried tightening the cones- do I need to remove the cassette- loosen off, re grease the axle and is there a way of seperating the end cap(s) to tighten a different way?
The wheel was recently rebuilt however I'd rather do this myself or worsecase send over to Bromley bikes (££)
Leave the wheel in the frame.
Undo the small allen bolt on the locking collar*.
*You can see the collar on the none driveside on this hub.
[img] 
[/img]
Then turn the colar until you get rid of the play.
Now tighten the allen bolt back up.
If only they were SS hubs?- this is a cassette/geared hub (first ISO from 2002)
If only they were SS hubs
The geared hubs now also use the same system.
[img] 
[/img]
I think you can upgrade to this too.
Have a look at the movies on the CK site, they may help.
[url= http://chrisking.com/tech/tech_movies ]http://chrisking.com/tech/tech_movies[/url]
Are you pissed Stu? that was a very helpful, non sarcastic post.
Very disappointed. 😐
Sorry Barry.
I'll head on up to the Oak in bit and come back and post something less helpfull. 🙄
I look forward to it. Tonight will be fuelled by Smirnoff and Fanta. Have a good night 😉
Ta guys
undo with 2 allen keys in each end of axel. then do collar up then do back up with the allens.
🙂
Given up and bought a Hope hoop/DT5.1. Going to sell it on as a do-up/rebuild ------------------>
Hora, 'if' you are really being serious, then drop me a line as I might be interested in the rear wheel.
You're selling a wheel because you can't be assed to adjust the adjustable bearings.
I'm lost for words.
You're selling a wheel because you can't be assed to adjust the adjustable bearings.
I'm lost for words.
Its over 7yrs old. Its been my sole rear wheel. Its had three new rims in its time, one axle and one shell already. It could prove to be a bargain but also - this is what Im thinking...what IF the ratchet/teeth etc inside are worn? Its potentially a never-ending spend.
Im sick of spending money on it. Its going on Ebay.
That's helped to sell it then...
Exactly- I was torn between making a quick-buck or looking like an money-incompetent edjit.
Oh and I paid £370 posted for the complete wheelset posted from Al at wheelcraft 😀
I'll give you twenty pounds for it.
And I'm robbing myself...
£19.50 and that's my last offer.
Oh sheesh. Choices. 😆
I'd love to make it into a salt and pepper set (front is 12mm qr). Possible?
Bored today Hora?
Tired. Dog-tired.
I'll give you a brand spanking new salt n pepper set for it.
You're not going to get a better offer than that.