Set of SRAM Guide Ultimate brakes.
Front is a full ultimate, carbon bladed lever, mmx clamp and Ti hardware pad bite point adjust. hose length 800mm
rear is an ultimate caliper again, Ti hardware, with a guide T lever. 1450mm hose.
both in used condition, bought a while back for a project that never panned out so I’ve not used them.
RSC lever has a small amount of corrosion on the breather hole on the bladder cover and the reach adjuster is missing. you can still adjust the reach using a small flat blade screwdriver though. The pad adjust seems to work OK.
the level T looks to have the wrong plastic end on probably from the original ultimate lever it replaced.
comes with pads, one set fitted are OK another are worn, so will need replaced.
also comes with bleed block and piston service block.
if stw message isn’t working email nikjohnson74 (at) gmail (dot) com
To contact this user, please register / login