How high are your bars (direct line from end of bar to ground) and how high is your saddle at full pedaling height from the ground again?

also from front of saddle to middle of stem what is the length?

dunno.

HTH 😀

not a clue. feels good where it is though.

6’2″ here.
Saddle level with bars (grips) or maybe half an inch higher.
Nose of saddle to centre of bars between 600 & 610mm.
Thats on an xl 5 spot, same on 21″ crush.
HTH

may i ask why from the ground, saddle height is related to leg extension. The height at which the bottom bracket sits from the ground does change so two different bikes will have the saddle at different heights even though both are set up with the same leg extension in mind.

Bars ends are 41″ from centre of grip end to floor. Dont know any other measurements off hand.

would be better bb to saddle?

bugger! not taken that into account
saddle height to bb (C2C)

Bars 103cm
saddle 111cm
nose of saddle to edge of stem 49cm.

I’m 6’1″ with 34.5″ inside leg riding an 18″ frame. Stem is 110mm 10 degree rise.

Marin mount vision.

Cheers DB
Mine is 41″ floor to bars
Saddle 43″ floor to bars

only kdding R

43.5″ floor to intersection of seat tube axis and top of saddle
28″ from there to centre of bars at stem
39.74″ from there to floor

Oh 6′ 0.5″

Bit lower on the bmx than on the 29er.
bit longer on the road bike than the cx.

6’3″ here and I have no idea but I have a 32″ inside leg so my saddle won’t be that hight really.

6’1 here and my bars are about 6-8 inches lower than my seat, but i have long legs and its a race bike.

edit: post was for different thread. sorry.